![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0021.jpg)
© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
3.
Completely remove the pad retainer bar
from the caliper.
4.
Remove the retainer spring from the
pressure plate.
NOTE: Brake pad retainer springs are pre-attached. DO NOT REMOVE.
5.
Carefully remove the adjuster plug form the caliper. Be careful
not to damage the inner seal.
6.
Check the adjuster boot for wear and damage. Replace if
damaged or worn.
Removing brake pads (2/4)