© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
Removing brake pads (1/4)
IMPORTANT: Always replace the brake pads by axle and use a new retaining
system for brake pads and pressure plates.
The 8mm adjuster components can be damaged if using open-ended wrenches or
power tools. Only use tools listed in the MAXX22T Maintenance Manual.
1.
Remove the wheel.
2.
Loosen the pad retainer screw from
the brake caliper. Apply slight
pressure on the pad retainer bar
with your hand at the same time.
NOTE: It is not necessary to remove the brake to replace the brake pads.