![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0023.jpg)
© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
11.
Manually push the brake caliper inboard
and remove the inboard brake pad.
12.
Remove the pressure plate from the caliper.
13.
Check the pressure plate for excessive
corrosion and damage. Replace if
necessary. Always replace by axle.
14.
Use a wire brush to clean pressure plate,
guide groove on caliper and pressure
plate and all machined surfaces on the
brake caliper. Remove any corrosion.
NOTE: Avoid causing any damage to the protection boots.
Removing brake pads (4/4)