new products
80 l New-Tech Magazine
QFN package. It is priced at $1.82
each, in 5,000-unit quantities. For
additional information, contact any
Microchip sales representative or
authorized worldwide distributor, or
visit Microchip’s Web site at http://
www.microchip.com/MCP39F511-042115a. To purchase products
mentioned in this press release, go
to microchipDIRECT or contact one
of Microchip’s authorized distribution
partners.
TI drives high-voltage
batteries with industry’s first
100-V high-side FET driver
Unprecedented flexibility and power
protection for advanced industrial
battery applications
Texas Instruments (TI) (NASDAQ:
TXN) today introduced the first single-
chip 100-V high-side FET driver
for high-power lithium-ion battery
applications, delivering advanced
power protection and control. The
bq76200
high-voltage
solution
efficiently drives high-side N-channel
charge and discharge FETs in
batteries commonly used in energy
storage systems and motor-driven
applications, including drones, power
tools, e-bikes and more. For more
details, see
www.ti.com/bq76200-pr.Compared to typical 50-V low-side
FET driver solutions, the 100-V high-
side FET driver provides greater
protection against possible inductive
transient events in motor-driven
applications, which can cause battery
voltages to jump as much as 200
percent above normal. The bq76200
also helps maintain constant battery
monitoring and enhanced system
diagnostics – even when charging
and discharging is disabled.
Key features and benefits of the
bq76200: chip-01
Versatile supply voltage range:
Compatible with a variety of battery
architectures, capacities and voltage
ranges from 8-V to 75-V, with an
absolute maximum of 100-V.
Advanced-protection FET control:
The fast-switching feature minimizes
fault response time and disables the
discharge FET if a battery has been
severely discharged.
Quick development time and reduced
overhead: The adaptable driver
works with small to large power FET
arrays by simply scaling the charge-
pump capacitor, reducing engineering
overhead and speeding development
time.
High integration and small package
size: The bq76200 integrates a high-
voltage charge pump and dual FET
drivers into one 5-mm by 4.4-mm
by 1-mm thin shrink small outline
package (TSSOP).
The bq76200 can be used in
conjunction with the bq76940 battery-
monitoring family, allowing for the
application to move to a high-side FET
drive and ensure that communication
is always possible. The bq76200 can
also drive TI’s CSD19531Q5A 100-
V NexFET™ power MOSFET as
showcased in the bq76200 evaluation
module.
Pricing and availability
The bq76200 is available now in the
TI store and through the company’s
authorized distribution network. The
driver is packaged in a 16-pin TSSOP
and is priced at US$1.69 in 1,000-unit
quantities.
Find out more about TI’s battery-
management solutions:
Read the blog post, “Why high-side
vs. low-side FET switching matters.”
Watch the videos, “TI’s bq76200 100V
Battery High-Side FET Driver” and
“Introduction to the bq76200 EVM.”
Visit the TI E2E™ Community Battery
Management forum to search for
solutions, get help, share knowledge,
and solve problems with fellow
engineers and TI exp
Cypress Unveils the
World’s Most Flexible One-Chip
ARM Cortex-M0 Solution
New PSoC® 4 L-Series Reduces
Costs and Gets Embedded Designs
to Market Faster with the Ability to
Develop Premium User Interfaces
and Product Variations Rapidly
Cypress
Semiconductor
Corp.
(Nasdaq: CY) today introduced a new
series from itsPSoC®4programmable
system-on-chip architecture. The new
PSoC 4 L-Series is the industry’s
most integrated single-chip solution
with a 32-bit ARM®-Cortex®-M0
core, adding up to 256KB flash
memory, 98 general purpose I/Os,
33 programmable analog and digital
blocks, a USB device controller, and a
control area network (CAN) interface.
The PSoC 4 L-Series is ideal for
a broad range of industrial and
consumer applications, leveraging
the flexibility of the PSoC architecture
to address multiple product variations
and
Cypress’s
industry-leading
CapSense® capacitive touch-sensing