EoW November 2008

67 / 112

EuroWire – November 2008 65
fencing, mesh-making & netting
Machinery
for fencing
and gabion
mesh
NOVA-S is a producer of chain link
fencing and gabion production
machinery.
4HR–220 CNC, –320 CNC and –420
CNC are automatic machines for
chain link fencing production, able
to produce fencing up to 2, 3 or
4 metres in height, using galvanised or
PVC-coated wire.
These high-speed machines are driven
by an electro-pneumatic system and
controlled by the CNC system which
enables control of the production
speed to suit the wire used and the
required mesh size.
Machines can be equipped with
either classical roll or the compact roll
winding machine.
The 6HR-80/4 gabion mesh weaving
machine can produce gabion mesh
of up to 4 metres in width, either on
rolls (up to 200m length) or directly
to a gabion finishing line, which
NOVA-S can also supply.
In the event of wire breakage
the mechano-electrical system
immediately stops the machine.
The motor drive enables the control
of the machine speed and provides a
smooth start.
NOVA-S – Slovakia
Fax: +421 3469 48 468
Email:
Website:
Four wires,
simultaneously,
with Angeli
Angeli’s machine for processing square mesh fence could provide the ideal solution
for manufacturers seeking a high production volume of high quality fence at low cost.
After many years of experience acquired in manufacturing traditional machines,
the company has turned all its efforts to the aim of realising a second generation of
machines – the new models MG2 and MG4.
The main features of models MG2 and MG4 are:
computerised operation of all functions •
use of new motors with more sophisticated control systems in order to ensure a •
higher precision in the realisation of the finished product
adoption of standardised safety devices, allowing the machine to operate •
automatically and stop immediately in case of failures
versatility. The machine can suit the requirements of both big industry and the small •
craftsman
Model MG4 is believed to be the only machine in the field which is able to process four
wires simultaneously at the desired braiding speed, thus offering an unskilled operator
the possibility of working with only two wires, in order to help training.
The spindles are driven by an asynchronous motor, having a high torque and speed
electronic control. This motor allows to match the spindle speed with the type of wire
used. In the second unit, the coiler, the fence sliding on control rollers is processed at
the edges by the two closing mechanisms and, always by the rollers, reaches the sector
where the rolls are prepared.
The coiler is preset for preparing both the normal and the compact rolls.
Angeli Srl – Italy Fax: +39 0546 28852
Email: Website :
6HR-80/4 – Gabion mesh weaving machine ▲ ▲
Angeli’s MG4 will process four wires simultaneously ▲ ▲