EoW March 2009

81 / 160

79
EuroWire – March 2009
2009 S-T
productivity and cost saving through
0.05% length measurement accuracy.
Taymer International Inc – Canada
Fax: +1 905 479 2636
Email:
Website:
Teknor Apex
Booth 3800
Vinyl division: All RoHS-compliant
products, including Apex® vinyl
Taymer has also been producing hot foil
printers for durable marking on PE, HDPE,
XLPE, nylon and Teflon, offering bright,
high contrast white printing on dark cable
jackets.
The printer produces highly accurate
length measurement and sequential
numbering, and is simple to operate and
change printing colours.
Taymer designs andmanufactures contact
length measurement system, including
The Length Rite 1200, for improved
Solvay Padanaplast SpA – Italy
Fax: +39 0521 870427
Email:
Website:
Taymer
International Inc
Booth 3727
Taymer International Inc has been
designing and building marking
equipment for the wire and cable industry
for over 40 years.
The product range includes surface
inspection and print verification systems,
hot foil printers, indent printers, aerospace
inkjet and laser printing solutions, and
cable measurement devices.
Taymer has recently developed a surface
inspection system for the wire and cable
industry designed to pick up defects
smaller than 1mm.
With multiple-camera set-up and advance
vision software, defects such as jacket
holes, bulges and surface blemishes will
be detected.
Taymer will also be exhibiting its print
verification system. Print View 1400
will freeze an image of a product as it is
being printed and display the image on a
remote monitor, enabling the operator to
easily verify print quality.
The Print View can include OCR software
to warn when the printer is producing
scrap.
➢➣➢
EUROTEK S.r.l. Tel: (+39) 0872 72581
C.da Villa Andreoli 215/A Fax: (+39) 0872 711978
I-66034 LANCIANO (Ch) http:\\
Italy P.IVA IT 01619630690 e-mail:
http:\\
e-mail:
Eurotek has designed and manufactured a co-extrusion crosshead type
ECM95-DS for the production of low tension cables, with a diameter con-
ductor of 95mm and a maximum insulated diameter of 135mm, capable
of extruding thermoplastic compounds. The head allows the manual cen-
tering of the die, in addition to the fine tuning of the tip.
The head has a heating system with heaters and a thermostatic
circuit; the holes for Dynisco temperature sensors control pressure and
temperature in the melt stream for Extrusion Processing.
Eurotek is a complete design and manufacturing resource for all your
extrusion needs; with its wide range of manual and fixed crossheads for
single layer and co-extrusion, flat cables and thermo-regulated type for
silicone rubber. Eurotek also offer parts, hardened steel, diamond insert
tooling and tungsten carbide.
Eurotek are exhibiting at WIRE-TUBE RUSSIA 12-15 May 2009.
Taymer's Print View verification system ▼ ▼