81
EuroWire – March 2009
2009
V-W
The machines are believed most suitable
for long parts or parts that require long
strokes.
The gripper dies are mounted in an
independent block that is lifted by a
pneumatic cylinder and easily slides out
of the machine, enabling a changeover
to be performed in minutes.
An easily accessible nut at the back part
of the machine adjusts the stroke.
The machine is designed with a slim body
that enables feeding of pre-bent parts
either from the front or from the side.
The side feed option enables feeding
of pre-bent parts for the purpose of
collaring.
Videx – Israel
Fax
: +972 3536 4802
:
videx@videx.co.ilWebsite
:
www.videx.co.ilWire Lab Company
Booth 2646
Wire Lab Company manufactures a
comprehensive
line
of
mechanical
descaling machinery for steel wire
producers.
Simple-to-use basic mechanical descaling
systems (such as model 920 Air Jet and
model 1030 Water Jet descalers) are well
suited for producers of industrial quality
wire products where emphasis is on
maintaining the lowest possible overall
production cost.
More
feature-rich
Wilco
descaling
systems allow customers to use wire rods
of various qualities with the objective
being to produce a consistently cleaned
wire rod suitable for making into higher
quality wire products.
These Wilco descaling systems (model
1250 and model 1750 automatic
wire brush descalers) incorporate the
Wilco automatic rod-brushing machine
into the process.
Eight circular wire brushes are positioned
around the rod circumference to
aggressively clean the rod surface of
secondary scale and red rust – both
detrimental to producing high quality
wire products.
More specialised Wilco descaling systems
(model 1060 descaling system with
lubricant pre-coating and model LRD
scale breaker for large diameter rods)
satisfy the needs of more specialised
producers. The model 1060 as part of
the mechanical descaling process applies
lubricant pre-coating compound in the
final stage of the mechanical descaling
process.
Manufacturers of high carbon wire and
those working with very high finishing
speeds benefit from the increased
lubrication established by the pre-coating
compound.
The Wilco large rod scale breaker (model
LRD) is designed for processing larger
rods up to 19mm in diameter.
Sheave offset is controlled by hydraulics,
thereby allowing simple straight-through
string up of the scale breaker.
Wire Lab Company –
USA
Fax
: +1 216 433 0007
:
e-mail@wirelab.comWebsite
:
www.wirelab.comParts made on a Videx Rod Header
▲
▲
Wilco Model 1250 automatic brush descaling
▲
▲
system