The UK Offshore Oil and Gas Fabricators Directory 2016

106 / 110

THE UK OFFSHORE OIL AND GAS FABRICATORS DIRECTORY 2016 page 106
Capabilities and Capacities – Facility 1
Total Area (m²) 210,000 m2
Fabrication Area Covered
(m²)
• 8,580 m2 consisting of four main halls
• Additional fabrication area of 1,800 m2 available for preparation and
cutting workshop, assembly workshop, pipe fabrication workshop
and stainless steel fabrication workshop
• Specific clean workshop for super duplex projects
Assembly and Erection
Area (m²)
• 22,300 m2
• Additional 14,000 m2 available if necessary
Cranage – Lifting Capacity
and Hook Height
(Tonnes and Metres)
• Workshops 1 to 4 – 2 x 30 tonnes (including five tonne auxiliary)
per workshop, hook height 21 metres
• Paint workshop – 2 x 10 tonnes
• Preparation and cutting workshop – 2 x 10 tonnes
• Assembly workshop – 1 x 16 tonnes
• Pipe fabrication workshop – 1 x 10 tonnes
• Stainless steel fabrication workshop – 1 x 5 tonnes
• 12 tonne mobile crane and various forklifts
• 126 tonne transporter
• Additional cranes, self-propelled modular transporters etc, hired
to suit project requirements as necessary
Load-Out Capacity
(Tonnes) 14,000 tonnes, 27.5 tonnes/m2
Minimum Water Depth
(Metres)
• 200 metre quay – 3.9 metres lowest astronomical tide (LAT)
• Angle load-out quay – 4.5 metres LAT
Maximum Water Depth
(Metres)
• 200 metre quay – 9.5 metres mean high water springs (MHWS)
• Angle load-out quay – ten metres MHWS
Dry-Dock Capability Not applicable