134
EuroWire – March 2008
wire
➣➢➣
31 March-04 April
40:1 L/D design with Fine’s proprietary gas
injection screw. The nitrogen gas is metered
using Model N2-400 Preciseflow system.
The two skin coats are applied via two 25mm,
24:1 L/D vertical extruders. The triple layer
crosshead includes a pneumatic actuated
bypass valve. The water cooling trough is all
stainless steel construction and incorporates a
Sikora capacitance and XY diameter gauging
system.
A main 1,200mm belt wrap capstan provides
the main pull force and then leads into a
630mm pintle take-up also with a 3m dancer
tension control system.
The operator control panel incorporates
discrete
temperature
controllers
and
touchscreen operator interface.
Also on display will be a 16 carrier braider
with 150 RPM operational speed and a
1,800mm portal floor traversing take-up.
Fine will also highlight the materials (tapes/
conductors) and cable products divisions.
Fine International Corporation – USA
Fax
: +1 732 933 4005
:
sales@fineinternational.comWebsite
:
www.fineinternational.comA much wider range of wire and cable
termination requirements and production
needs can now be met with Fisher-Tech’s line
of Injected Metal Assembly (IMA) systems.
These wire and cable termination systems
can cast zinc alloy terminations with a volume
as large as to 65cm
3
(4 in
3
) or as small as
10cm
3
(0.6 in
3
) directly onto wires, cables
and ropes up to 10mm (3/8 in) in diameter.
FisherTech’s cable termination systems also
meet specific production requirements:
manual operation for low volume production
who will be showing a fully operational
skin-foam-skin extrusion line.
Components of the line include an 800mm
O frame pintle powered pay-off with a
3m vertical dancer tension control system
(350mm root diameter aluminium sheaves).
A 1,200mm belt wrap style input capstan
with AC servo drive control accurately feeds
the bare conductor. A special Boockmann
Helicord cleaning system will also be included
on the line.
An induction pre-heater provides conductor
heating. The main extruder is a 65mm,
A number of swell factors affords design
engineers the flexibility to choose the size
yarn and swell factor that best suits the cable.
Fil-tec Inc – USA
Fax
: +1 301 824 6938
:
fil-tec@fil-tec.comWebsite
:
www.fil-tec.comFine International Corporation is a worldwide
supplier of wire and cable machinery,
Fine International
9 F22
1,800mm portal floor traversing take-up
▲
FisherTech
12 E37