![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0137.jpg)
135
EuroWire – March 2008
wire
31 March-04 April
needs, semi-automatic for moderate volume
production and fully automatic for integration
into current production lines. The high
capacity AM51 opens up new application
opportunities with its maximum shot size up
to 4 in
3
(65cm
3
) and cable diameters to 10mm
(3/8 in).
The AM91 entry-level, manually operated
system is designed for small to mid-size cable
terminations with a maximum shot size of
0.6 in
3
(10cm
3
) on wires and cables to ¼ inch
(6mm).
The AM46 IMA system, with the same casting
capacity as the AM 91, can be configured for
semi-automatic operation.
FisherTech’s cable termination systems form
and join any shaped termination directly
to single wire, multi-strand cable, flexible
shafting, or wire rope with or without a
fibre core in a single operation. The process
eliminates use of pre-manufactured fittings
and
conventional
assembly
methods.
Termination quality and productivity are
increased, while manufacturing costs are
reduced.
Pull-off strength is greater than that of the
wire or cable. FisherTech’s tooling ensures
close tolerance, part-to-part consistency,
and the net shape, flash-free terminations
are ready- to-use. Zinc alloy exhibits high
strength, dimensional stability and load
bearing characteristics, with mechanical
properties similar to low carbon steel. High
fluidity allows casting of complex, intricate
detail, and the alloy is fully recyclable.
FisherTech – Canada
Fax
: +1 705 748 6312
:
info@fishertech.comWebsite
:
www.fishercast.comH Folke Sandelin AB is the sole supplier of
Hansson-Robertson continuous lead extruder.
The extruder has been improved upon in all
aspects, especially the control systems. It is
now fully automated in its start and operation
and is extremely reliable and accurate,
something that ensures closer tolerances and
lead savings.
The latest design lead extruder is a horizontal,
fully automatic, floor standing unit that
eliminates the need for a large and expensive
foundation pit and is also very easy to
maintain. The equipment is often used to
continuously extrude long length cables for
over three weeks, which equals around 600
tons of lead alloy, to a very high accuracy.
Further lead extruder development is
constantly ongoing.
H Folke Sandelin AB – Sweden
Fax
: +46 141 20 36 39
:
info@hfsab.comWebsite
:
www.hfsab.comFisherTech
–
meeting
specific
production
requirements
▲
Folke Sandelin AB
9 E38
Extruder improved in all aspects
▲