wire
2014 show
➣➢➣
7
th
- 11
th
April
March 2014
122
Larger cable diameters require larger sized
systems. Maximum admitted pressure is
10 bar and operating temperature is from
190 to 250°C and more.
Extruders type ET.45.25D - ET.80.25D
for thermoplastic materials: Suitable for
PVC, polyethylene HDPE, cross-linked
polyethylene XLPE, halogen free; three
phase single hopper loader suitable
for granules; volumetric dosing unit;
and operation via a Siemens 19" colour
screen to display and set linear speed,
alarms, co-extrusion synchronism and
temperature control.
Euro Extrusion Srl – Italy
Website
:
Euroalpha
Stand: 11A43
Euroalpha manufactures high technology
drawing machines for non-ferrous wires.
Encouraged by customers, and based
on deep technical expertise, Euroalpha
has launched a non-slip heavy-duty rod
breakdown machine.
The R5-model is suitable for drawing large
round wires, trolley as well as at wires
for copper/copper alloys, aluminium/
aluminium alloys, according to the
nished wires to be produced, as well as
the inlet wire available.
This R5-model is substantially di erent
from the other conventional machines
proposed, and uses:
•
multi-motor machine, each capstan
is individually driven by independent
motors with precise synchronisation
of the motors’ speed for fully non-slip
operations
•
special execution with idle loop-spacer
rings on each drawing capstan to draw
large at wires
•
suitable
with
di erent
drawing
capstans
size,
equipped
with
inner cooled by water and with
pneumatically activated rollers to
facilitate string-up operations as well
as to prevent the wire loosening
•
high-precision shaving system for the
removal of surface oxides on the rod
coil, can be positioned in the drawing
machine according to the user’s
requirements
•
skin-pass system to remove any scrap
material from the surface of the nal
wire surface
•
thanks to the individual motors for
each capstan, the machines have
lower energy consumption because
the motors are switched o if the
capstans are not used
•
high
productivity
and
limited
maintenance are guaranteed by the
traditional guidelines of the Euroalpha
design.
Euroalpha Srl – Italy
Website
:
Eurolls
Stand: 11D40
Eurolls SpA has registered a very good
year, almost doubling previous year
results in sales of the machinery division.
The main part of this success has come
from the construction wire market, but
with extremely good results also in the
industrial wire market after equipment
installations in Europe, North and South
America, Middle and Far East, and North
and South Africa.
Eurolls will display a new three draft cold
rolling line for production of ribbed wire
in the range 3.4-16mm, including an
innovative bull block with the possibility
of producing either traditional cold rolled
material (by use of the well-known Eurolls
cassettes, and rolls) or high ductility wire
according to the new European standard
for construction material (by stretching).
Also on show will be straightening and
cutting machines of the new production
line with higher productivity. Other
improvements include speed increase,
use of latest electronics and command
through touch screen, possibility of
connection to the Internet for trouble
shooting from its facilities to anywhere
in the world, and tooling common on all
models.
A full range of Eurolls cold rolling cassettes
will also be on display with technicians
ready to illustrate the main features and
advantages.
Concerning the industrial wire eld, Eurolls
will present the new wet drawing line with
technical alterations for steel cord wire
production. Technically speaking great
care has been taken in the design to avoid
wire torsions that lead to bad quality.
An innovative automatic winding control
on the wire allows optimal wire tension in
winding, and an automatic recognition of
the position of the two side anges of the
spools avoiding strati cation di erences in
these critical points.
Technical innovations have been adopted
to also improve di cult points in
production: easier threading of the line
and passing of wire through dancer and
into the spooler, control panel with all
production data in full operator sight, and
less and simpler maintenance needs.
The machine is compact, simple and
e ective, with an extremely streamlined
wire path depending on the product to be
made. It has the ability to collect the nal
wire on di erent types of reels, which are
able to satisfy any subsequent processing
step.
It is easily manageable, requires little
maintenance, and is suitable for any type
of location, even in environments with
little technical knowledge.
Eurolls SpA – Italy
Website
:
FIB
Stand: 11B62
FIB Belgium launches a new generation of
open re furnaces saving up to 27 per cent
of energy.
Integrating a new design of the process
chamber, sound premixed technology
and
high
performance
insulation
materials, the improved generation of
furnaces saves energy up to 27 per cent
compared with classical open re furnaces
(based on a wire diameter of 0.75mm –
DV100).
The system skips complex and sensitive
heat
exchanger
systems
or
high
temperature circulation fans.
Optionally, the furnace may be equipped
with the continuous monitoring of the
process atmosphere to compensate
uctuations of the main gas composition
to stabilise the quality of the product.
The running of the equipment by the
operators has been kept very close to the
existing open re furnaces and is even
simpler to operate.
FIB – Belgium
Website
: www. b.be
▲
The newmodel R5 from Euroalpha
▲
Simpler to operate than open re furnaces
