962 / 1070
M Offi: 405-631-9701
962
Fx: 405-631-0585
T
|
TOOLS
Dual-POrt ManOMeter
accessOry HeaD
Static Pressure/Gas Pressure
Differential
• Inches of Water column,
mBar
• Use to find static pressure
drops
• Locate duct blockages
• Find the pressure change
across a fan
• Check gas pressure
• Auto off to conserve
battery life
• Accuracy: ± 1.5% FS
• Range: -60.0 to +60.0 inches WC
• Resolution: down to 0.01 inches WC
• Hoses included (5 feet)
lok#
t1453
ADMN2 Dual-Port Manometer
accessory head
static Pressure PrObes
FOr ManOMeters
Use to measure duct
static pressure the right
way. The magnetic flange
and painted arrow ensure
proper orientation and
allow hands free use.
lok#
t1776
ASP2 Static Pressure Probes
air VelOcity anD
air teMPerature
accessOry HeaD
Designed to measure
air velocity and air
temperature. It can be used
to estimate CFM (cubic
feet/ minute). You can
measure air velocity in feet/
minute, miles/hour, meters/
second, or kilometers/hour.
The AAV3 also measures
temperature in °C or °F.
lok#
t1456
AAV3 Air velocity and air
temperature accessory head
Deluxe silicOne test
leaDs
• Removable probe tips.
• High copper stranding, silicone insulated
test leads.
• Basket style strain relief.
• Fit in test lead holders on back of SC
series clamp meters and HS30 series Stick
meters.
lok#
t1458
ADLS2 Deluxe Test Leads
4.5˝ Piercing PrObe
witH HanDle
NSF rated for food.
Maximum °F (probe) 1500
lok#
t1460
ATR1 Piercing Probe
K-tyPe, cliP-On wet
bulb tHerMOcOuPle
An inexpensive and effective way to take a wet
bulb measurement. The ATWB1 is equipped
with a durable hydrophillic sock specifically
designed for wet bulb measurements.
The alligator clip allows the user to affix
the ATWB1 to a fixed surface, such as a
vent, allowing the user to take hands free
measurements. The ATWB1 also comes
with a wrap tab making it easy to wind and
store the thermocouple. The ATWB1, K-Type
thermocouple can be used continuously to
take temperature readings up to 150°F and
can be used with any thermometer which
accepts a K-type thermocouple.
lok#
t1459
ATWB1 K-Type clip-on wet bulb
thermocouple
VacuuM gauge
accessOry HeaD
• See pressure drop from atmospheric to
under 2000 microns.
• Handles pressure overloads
• Excellent accuracy
• Temperature compensation
lok#
t1455
AVG2 Vacuum gauge accessory
head
relatiVe HuMiDity HeaD
M~ tmp d rH%
c~ y ~ d dy po
mp~
• Low battery indication: Red LED is lit when
the voltage drops below the operating level.
• Output impedance: 500Ω approx.
• Operating environment: 32°F to 120°F at
<95%RH.
• Storage temperature: -4°F to 140°F <80%
RH with battery removed.
• Range: 32°F to 140°F
• Accuracy: ±1°F (32° - 113°F)
• Battery: 9V
• Dimensions: 146mm(H) x 67mm(W) x
32mm(D)
• Weight: 180g including battery approx.
• Warranty: 1 year
lok#
t1454
ARH4 Relative humidity head
METERS