Mai Offic: 405-631-9701
958
Fax: 405-631-0585
T
|
TOOLS
SHORTPRO TOOL
The ShortPro Tool is a 24 volt system "short-
finder". It'll keep the Tech from wasting a
pocketful of fuses while trying to locate a
control voltage short. A built-in automatically
resetting circuit breaker turns on a bright red
LED when tripped.
As the Tech removes the short, the breaker
automatically resets, the LED goes out,
and the circuit is restored. Lightweight and
compact, with two 18" leads.
Locke#
T2610
ZSPRT Short finder tool
ZEBRA ‘DAPTERS
FUSED POWER TAP
CORDSETS & “CHEATER”
CORDS
A significantly SAFER way to
obtain and use 120 Volt power
T2603
T2602
Zebra’Dapters provide a visual indication
of voltage levels before damage can occur.
And, if the indicator lamp is ignored, the fuse
provides a last line of defense to protect your
valuable tools from simple mistakes. The
fused circuit also gives an extra measure
of safety for you and for your customer’s
equipment.
Locke#
T2602 ZD001 Male End
-
Safer
Power from Outlet to test Motors,
Components & Systems
T2603 ZD002 Female End
-
Safer
Power for Vacuum Pumps, Tools,
and Lights at the Condensing Unit or
in Attic
`
SERVICE TOOLS, FUSE HOLDERS, POWER TAPS & TESTERS
ZEBRA STAT
®
Zrastat Assists tchicias to
troulshoot prolms i HVAC/R systms
5 ways:
1•
ZebraStat performs immediate continuity
checks on up to six circuits at a time
2•
ZebraStat acts as a remote control, saving
you steps from attic, roof or basement
3•
ZebraStat reports signal levels on control
lines - visually displaying them
4•
ZebraStat monitors voltage levels,
displaying it as
OK
-
Qustioal
- or
Low
5•
ZebraStat will act as an automatically-
resetting circuit breaker, temporarily
replacing a system fuse while looking for
‘shorted’ lines or components
The ZebraStat is a fully electronic,
easy-to-use diagnostic tool for all HVAC
and Refrigeration System Technicians.
Troubleshoot Single- and Multi-Stage,
Residential and Commercial systems
with ease using any or all of ZebraStat’s
5 operating modes.
Locke#
T2600
ZS002 Zebra Stat
®
MEDIUM TEST JUMPERS
Alligator clip jumper wires designed for the
HVAC/R Technician. Each set comes with a
hook-and-loop strap that keeps your Zebra-
Gators organized, either in the tool box or
hanging up in your vehicle.
Locke#
T2604
ZG003 Medium test jumpers
VARIABLE SPEED ZEBRA
DIAGNOSTIC TOOL
A comprehensive tool for working with ECM
Motors and the circuit boards on the furnace
or air handler that they require to operate
properly. A training and educational DVD is
included with each VZ-7.
The Variable Speed Zebra operates in-line
with the system, in real time, testing both
major sections (motor and control circuit
boards) simultaneously.
• Accurately diagnose exactly which
component has failed in a Variable Speed
system that isn’t working correctly
• To assist in system setup by reporting CFM
airflow (and RPM) as room vents and other
controls are adjusted
• To allow easy experimentation of all of the
adjustable settings and options available on
the Variable Speed Motor; to allow optimum
customer comfort
Locke#
T2606
VZ-7 Variable Speed Zebra
Diagnostic tool
ATO/C FUSES
Locke#
T2611
ZFP03-ATO/C 25, 3 amp Fuses
T2605
ZFP05-ATO/C 25, 5 amp Fuses