956 / 1070
Mai Offic: 405-631-9701
956
Fax: 405-631-0585
T
|
TOOLS
CONDENSER TOOLS & THERMOMETERS
INFRARED AND CONTACT
THERMOMETER
• Single-point laser
sighting for quick
measurements up
close or at a distance
• Temperature range:
-40°F to +1022°F
(-40°C to +550°C)
• Contact thermometry
capability, compatible
with all standard
mini-connector K-type
thermocouples
• Velcro® pipe probe included for superheat
and subcooling, and other contact and
ambient measurements
• Easy emissivity adjustment for measuring
pipes and ducts more accurately
• MIN/MAX and differential functions quickly
identify problems
• Includes hard carry case
• Two-year warranty
• Users manual
Locke#
T1470
561
Infrared and Contact
Thermometer
VISUAL INFRARED
THERMOMETER
• Infrared thermometer with
thermal imaging capabilities
for noncontact surface
temperature measurement for
use in monitoring electrical,
mechanical, industrial, HVAC,
and automotive systems
• Measures temperature from
-10 to +250 degrees C (14
to 482 degrees F) with an
accuracy of + or - 2 degrees
C or + or - 2% of the reading,
whichever is greater, and a
thermal sensitivity of less
than or equal to 250mK
• Uncooled pyroelectric ceramic sensor
captures thermal and visual images of the
target and works at a minimum distance of
50cm
• Thermal camera with LCD screen blends
the visual and infrared images in 25%
increments for inspection of full visual,
incrementally blended, or full infrared
images
• Included SD memory card stores up to
10,000 images for inspection, analysis, and
reporting on a computer
Locke#
T1905
VT-02 Visual Infrared
Thermometer
FIN COMB
One-piece adjustable combs. The resilient
nylon comb material will not damage
the soft aluminum fins of condenser or
evaporator units. Malco fin tools function
by either pushing or pulling and efficiently
straighten fins in tight quarters or where
multiple passes over bent fins are required.
Comfortable offset handles provide a sure
grip and protect knuckles from scraping.
Locke#
T4951
FST Fin Comb 8,10,12 Or 14
Fins Per Inch
T4952
FST2 Fin Comb 16,18,20, Or 22
Fins Per Inch
SIDEKICK CONDENSER
CLEANING TOOL
30" tube with overall length of 33" lets you
clean those hard to reach areas.
Locke#
T1674
0230 Condenser Cleaning Tool
THREADED ROD CUTTER
• Designed to cut mild steel threaded rod.
• Unique die design protects the threaded rod
from damage while cutting.
• No cleaning or deburring work necessary after
cutting. Just screw the nut on the cut end.
• Double sided easy to replace dies.
Locke#
T3300
AB-3U 3/8" Threaded Rod Cutter
JUGLUGGER
REFRIGERANT STRAP
Save trips to and from your service truck to
job sites by using the JugLugger® refrigerant
strap. Use it to carry heavy cylinders and tools
from your service truck to the job site.
The rugged shoulder pad is covered with high
quality, heavy duty Nylon and a special anti-
slip fabric to keep it secure on your shoulder.
The adjustable, high strength strap and 1/2"
zinc plated steel snap rings make it to carry
heavy gear.
Locke#
T2627
Juglugger Refrigerant Strap
FIN COMB
"PH" Series fin comb for shorter fins.
Locke#
T0008
61154 12" & 14" Fin Comb
T0025
61155 16" & 17" Fin Comb
T0026
61156 18" & 20" Fin Comb
T0027
61157
21
/
22
&
23
/
24
" fin comb
FIN COMB
Cleans and straightens fins for better
operating efficiency. Features sliding
tension bar, stainless steel teeth and
"knuckle saver" handle.
Locke#
T0024
MA-MFC2
Fin Comb