960 / 1070
Mai Offic: 405-631-9701
960
Fax: 405-631-0585
T
|
TOOLS
DIGITAL STICK METER
WITH NON-CONTACT VOLTAGE
Auto-Ranging
Analog Bar Graph
Temperature
Non-contact Votage
Microamps
Frequency
Capacitance
Rugged Case
Hi-Voltage Indicators
Auto Power Off
Backlight
True RMS
Every HS30 series meter comes packaged
inside the padded ANC1 4-pocket case. A
300AAC clamp head (ACH) is included. Just
slide the clamp onto the top of the HS30
meter to read amps. Also included are deluxe
silicone test leads, alligator clips, k-type
thermocouple (HS33, HS35, HS36), battery
(installed), operator’s manual, and RFM66
fuse (installed).
Test Lead Solutions
• Probe storage in the back
• Removable probe tips for connection to
most accessory heads.
• Attach detachable probe tip directly into jack
for easy and safe voltage testing.
• Leads conveniently wrap around meter.
Locke#
T1450
HS36-K11 Digital Stick Meter
T1462
RFM66(4) Fuse for HS-36
ELECTRONIC HANDLE
Converts Every Fieldpiece Accessory Head
into a Stand Alone Meter
Locke#
T1457
EHDL1 Electronic Handle
MILLIAMPS & MICROAMP
ACCESSORY
• Measures milliamps and microamps for
flame diode test. Measures 4 to 20mA
control circuits.
• Includes flame diode adapter kit (AQK3).
• Resolution: 0.1 for meters with 0.1mVDC.
• Accuracy: DC: ±(1.0%rdg + 1dgt) AC:
±(1.5% + 2dgts).
• Max current: 200mA AC or DC.
Locke#
T1772
AUA2 Milliamps & Microamp
Accessory
400A AMP CLAMP
ACCESSORY
The claw feature at the top of the clamp allows
for quickly picking out the wire you need to
measure and isolating it in the clamp. Once
the current carrying conductor is isolated, the
amperage is converted to mVAC for reading
directly on the meter. The ACH4 works with
the Fieldpiece “Stick” meter, EHDL1 Electronic
Handle, DL3 Data Logger, the HG2 HVAC
Guide® System Analyzer or any other digital
multimeter (with mVAC range) connected by
Fieldpiece ADLS2 detachable silicone leads
or AHDL1 handle adapter.
Locke#
T1775
ACH4 400A Amp Clamp
Accessory
METERS WITH ACCESSORY HEADS
A/C SUPERHEAT &
SUBCOOLING HEAD
Measures refrigerant
pressure and temperature
and calculates superheat
or subcooling for R22 and
R410A.
• Display pressure
• Display temperature
• Display superheat
• Display subcooling
• Select R22 or R410A.
• Auto-off can be disabled for data logging.
NEW FEATURES
• Includes "T".
• Now accepts K-type thermocouples. ATC1
included.
• LED indicates when readings are stable.
• Thermocouple calibration pot.
• Atmosphere pressure calibration.
Locke#
T1656
ASX14 Superheat & Subcooling
Head
CARBON MONOXIDE
HEAD & PUMP
Measures CO in air and finds sources.
• Fast enough to locate CO source in “walk-
around” test.
• Three pin sensor for better performance.
• Select averaging or normal for smoothing or
fast response to change.
• Range: 0 to 1000PPM (2000PPM with 5
minute max exposure time).
• Initial accuracy: 0-15ppm ±5% reading ±1
ppm after zeroing;15-35ppm ±5% reading
±2 ppm after zeroing;
0-1000ppm ±5% reading ±5 ppm after
zeroing.
• Response time: <70sec to 90%of reading.
• Operating temperature: 32 to 105 ºF.
Locke#
T1657
ACMK3 CO Head