![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0092.jpg)
Technology News
www.read-tpt.com90
S
eptember
2012
Dr. Linsinger-Str. 24, A-4662 Steyrermuehl
Tel. +43 7613 88 40, Fax +43 7613 88 40-951
E-Mail:
maschinenbau@linsinger.comw w w. l i n s i n g e r . c o m
ONE longitudinal tube mill ERW –
TWO High-Quality
LINSINGER
machines
Strip edge milling machine
BFMK for welding edge
preparation with highest
accuracy
Travelling tube cut-off
machine Multi-cut for very
short cutting times
Both machines
are adapted
on the
line speed
VISIT US:
Stand 1/26/1J25
Tube-and-Pipe_180x125_310712.indd 1
31.07.2012 22:41
Dealing with the internal
cleaning of pipes and shafts
THE cleaning of pipes and shafts can
be – especially in the case of internal
cleaning – a special challenge for
conventional cleaning devices like
high pressure and ultrasound washing
machines. The difficulties increase
further with small diameters or long and
curved pipes.
For this case ph-cleantec, with its
universal low pressure hot cleaning
technology, offers a simple and flexible
alternative.
The
basic
concept
of
this
technologyical device consists of hand-
guided systems operating with low
pressure (up to a max 14 bar) and high
water temperature (up to 95°C).
By means of an electrical flow heater
the technology is ready for operation
within 1 minute and the low pressure
makes sure that nothing is damaged and
that the procedure can be used in the
workshop without affecting workers and
the environment. For internal cleaning
different lances or flexible nozzles from
a diameter of 4mm in desired lengths
are available. Therefore it is possible
to clean sensitive components with
curvatures and close passages much
more easily. Of course the procedure is
also well suited to the outside cleaning
of shafts, pipes and cubic components
at a factory.
Larger and heavy parts can be cleaned
on stationary collectors with desired
dimensions and the water is reprocessed
by a special recycling procedure so it can
be reused.
Besides the close-to-process parts
cleaning the ph-cleantec cleaning
devices can also be used in the field of
machine maintenance.
ph-cleantec GmbH
– Germany
Email:
info@ph-cleantec.deWebsite:
www.ph-cleantec.comPipe and shaft cleaning