TPT September 2015

87 / 124

Bending machinery & tools
September 2015 85
Bending machines
model C50 and C22
WITH more than thirty years of
experience providing hose and tube
processing equipment to the worldwide
market, OP Srl is presenting its new
bending machines, C50 and C22.
These machines were developed for
bending rigid tubes in stainless (AISI
316 TI) and carbon steel (ST 37.4).
Each toolset can be easily changed
without any setting or special devices.
A simple graduator protractor is easy to
adjust and can be used to change the
bend angle.
The model C50 can bend tubes by a
maximum external diameter of 50mm
with a bending angle up to 180°, while
the bending time at 90° is six seconds
with a bending angle tolerance of 2°.
The model C22 can bend tubes with
a maximum external diameter of 22mm
with a bending angle up to 180°, while
the bending time at 90° is approximately
five seconds with a bending angle
tolerance of ±1° max.
The model C50 can also be equipped
with an easy and intuitive electronic
control with colour display touchscreen,
which ensures very precise bending by
advanced software functions.
The C50 and C22 can be supplied
with double pedals as well as special
voltage requirements upon request.
OP Srl – Italy
Email:
Website:
The model C50
from OP
Pneumatic welding machine
for crossover fittings
RITMO SpA is an Italian company with
35 years of experience in the manu-
facturing of plastic welding machines
and equipment.
The company’s S02 workshop welding
machine is able to thermo-mould PP-R
fittings for civil and industrial purposes.
The special pieces are called
‘crossover fittings’ since they are
shaped to overtake an existing pipeline.
They have a range of diameters from
20 to 32mm. The S02 features a cutting
station able to prepare the working
pipes to the required size. After the cut,
the segments are heated, in order to be
bent in a special bending station.
The bending station is composed
of two working units, which are
independent and configurable with
different working diameters to ensure
flexibility and productivity.
For every work cycle, the S02 is able
to realise up to ten special fittings.
Ritmo SpA – Italy
Fax: +39 049 9901993
Email:
Website:
Ritmo’s S02