71 / 116
PAGE 71
PRICES SUBJECT TO CHANGEWITHOUT NOTICE
ADHESIVES
JANTZ SUPPLY
★
1-800-351-8900
★
WWW.KNIFEMAKING.COMDevcon Epoxy in the Dev-tube, gives you
correct amounts of resin and hardener
automatically, no measuring required. The
high-strength 2-ton epoxy is waterproof,
bonds wood, metals, micarta, stag,
Dymondwood, virtually any knife part with
a crystal clear finish that cures at room
temperature in about 30 minutes. Made
to withstand high impact and high-stress
situations. Available in 1 oz. syringe or a box
of two bottles each 4.25 oz. The five minute
epoxy has the same features as the 2-ton,
but sets up much faster with only slightly less
strength and is water resistant.
Can Not Ship 2-Ton Epoxy Air.
CAT.# SIZE DESCRIPTION PRICE
DVE5
1 oz.
5 Minute Syringe
3.49
DVE30
1 oz.
2-Ton Syringe
3.49
DVE33
8.5 oz. Total 2-Ton Bottles
11.95
DVE59
8.5 oz. Total 5 Minute Bottles
12.95
Acraglas gel has all the features of Acraglas,
plus it shrinks slightly less and the butter
smooth consistency prevents runs and mess.
Kit contains enough to bed 2 rifles.
Can Not Ship Air.
CAT.#
DESCRIPTION
PRICE
BWAG
Acraglas-Gel Kit
21.99
Acraglas shrinks less than 1/10 of 1%,
strengthens wood, simplifies inletting in semi
inletted stocks, slow set-up allows ample
time to seat barrel & action. Acid and water
proof, seals inletting. Kit contains everything
needed to bed 2 rifles or lots of knife handles.
Can Not Ship Air.
CAT.#
DESCRIPTION
PRICE
BWA
Acraglas Kit
18.99
Acraglas and acraglas gel provide the
professional or amateur with an easy to use
superior bedding compound, specifically
designed and manufactured to make your
rifle shoot more accurately. Also great to use
as a fill-in for stone material “inclusions” or
cracks. Fills cracks and blemishes in wood
knife handles, works as an epoxy to hold
handles on. Brown and black dye is included
in both kits.
WEST SYSTEM epoxy cures to a high-strength
plastic solid at room temperatures, by mixing
105 liquid epoxy resin and 206 hardener in a
5:1 ratio. Designed specifically to bond to a
wide range of materials including fiberglass,
many metals, wood fibers, reinforcing fabrics,
foam and other composite materials. This
highly moisture-resistant plastic is highly
recommended when extended working and
cure time are needed or to provide adequate
working time at higher temperatures. The 206
slow-cure hardener has a working time of 90
to 110 minutes at 70°F with a minimum cure
temperature of 60°F. Cure time for maximum
strength is 1-4 days. West Epoxy is easy to
sand and shape when cured and does not
shrink after curing.
Can Not Ship Air.
Pure, dry, colored pigments can be used alone
or mixed to produce additional colors to suit any
project where color is desired. Add the paste to
the epoxy resin then measure that mixture in the
proper ration with the hardener. Use a maximum
of approximately 10% volume pigment paste to
combined resin and hardener. To maintain the
same color over several projects, mix a master
batch of color with resin and store for later use
– only add hardener when you are ready to use.
G/flex epoxies are toughened, resilient two-
part epoxies engineered for superior grip to
metals, plastics, glass, masonry, fiberglass,
and difficult to bond woods. G/flex epoxies
make bonds that absorb the stresses of
expansion, contraction, shock and vibration.
Easy-to-use 1:1 mix ratio gives you 46 minute
pot life and a working time of 75 minutes at
room temperature. Initial cure in 3-4 hours
with workable cure in 7-10 hours.
Easy-to-use, fast curing epoxy system for
quick repairs, tooling and general bonding.
Use for spot application to hold parts in place
while standard epoxy bonds cure. Bonds to
wood, fiberglass, and metal. 1:1 mixture.
Cures in 3-5 minutes. 4 fl. oz resin and 4 fl.
oz hardener.
Designed for convenient and accurate
metering of #105 resin and #206 hardener.
Calibrated to delivery approximately 0.8 fl oz
of resin / hardener with one full stroke. Set
contains one resin pump and two hardener
pumps which mount directly on the containers
eliminating mess and waste. Read and follow
priming, ratio verification, and operating
instructions included with pumps.
Epoxy based liquid
colorants used to
tint epoxy mixture
and provide an even
color base for the
final finish system.
Add to mixed resin/
hardener at a rate
of approx. 1 tsp of
pigment to 8 fluid oz
epoxy. More pigment increases opaqueness
and mixture viscosity. One 4 fl oz bottle will
tint approximately 1-1/2 gallons of epoxy.
CAT.# DESCRIPTION PRICE
WE105A
1 qt #105 Resin
39.71
WE105B
.98 Gallon #105 Resin
99.73
WE206A
.44 pt #206 Slow Hardener
20.50
WE206B
.86 Quart #206 Slow Hardener
46.06
CAT.# DESCRIPTION PRICE
WE6508
G/Flex Liquid 4 oz.
22.49
WE6558
G/Flex Pre-Thickened 4.5 oz.
24.65
CAT.# DESCRIPTION PRICE
WE8654
5 Minute Adhesive
21.48
CAT.# DESCRIPTION PRICE
WE300
Pump Set
15.69
CAT.# COLOR PIGMENT PRICE
WE5018
White
17.95
WE5028
Black
17.95
WE5038
Gray
17.95
West System Adhesives
System Three
West System Pump Set
Epoxy
Bedding Compounds
Gel
105/206
Epoxy
Epoxy Paste Pigment
G/Flex
®
Epoxy
5
Minute
Adhesive
West System Color Pigments
CAT.#
COLOR
SIZE PRICE
SE12
SE22
SE32
SE42
SE52
SE62
SE72
SE14
SE24
SE34
SE44
SE54
SE64
SE74
White
Black
Brown
Blue
Yellow
Green
Red
White
Black
Brown
Blue
Yellow
Green
Red
2 oz.
2 oz.
2 oz.
2 oz.
2 oz.
2 oz.
2 oz.
4 oz.
4 oz.
4 oz.
4 oz.
4 oz.
4 oz.
4 oz.
14.95
14.95
14.95
14.95
27.95
18.95
18.95
17.95
17.95
17.95
21.95
39.95
27.95
27.95