72 / 116
PAGE 72
PRICES SUBJECT TO CHANGEWITHOUT NOTICE
ADHESIVES
WWW.KNIFEMAKING.COM★
1-800-351-8900
★
JANTZ SUPPLY
ZAP-A-GAP the best instant glue in the world.
The ability to bond virtually anything with
consistency. A little goes a long way! Only
apply enough glue to evenly coat the area to
be bonded.
ZAP CA
is the thinest superior
penetrating glue. It bonds instantly.
ZAP
CA+
(PT01) is for gap filling. The penetrating
ability allows it to go where most cannot
and will harden soft areas and helps prevent
cracks, cracks almost disappear, great for
both stabilized and natural woods. 7-10 secs
for positioning. Works on oily surfaces. Cures
in about 20 sec. Use
ZIP KICKER
for a faster
cure.
Z-7 DEBONDER
will soften CA glue
prior to sanding. Removes any instant glue
from skin, work surfaces, many other uses.
ZAP GEL
will not run nor flow. Super thick
jelly like CA. The strongest CA glue available.
Tube has tip to allow precise application.
Great for stones, inlays, other small parts.
Allows plenty of time for working before cures.
Can Not Ship PT15 or PT16 Air.
CAT.#
DESCRIPTION
PRICE
PT01
ZAP A GAP CA+ 2 oz.
13.99
PT07
ZAP A GAP CA 2 oz.
13.99
PT26
ZAP A GAP GEL .7 oz.
8.79
PT15
ZIP KICKER 2 oz.
6.99
PT16
Z-7 DEBONDER 1 oz.
4.79
A high strength fast setting adhesive that cures
at room temperature. Excellent bonding. 1/2 oz.
CAT.#
DESCRIPTION
PRICE
IR901
3M CA4 Instant Glue
4.95
CAT.# DESCRIPTION SIZE PRICE
SC101
Hot Stuff Original
2 oz
12.95
SC102
Hot Stuff Original
4 oz
24.59
SC103
Super T Medium
2 oz
12.95
SC104
Special T Thick
2 oz
13.45
SC105
Quick Accelerator
6 oz
15.95
SC106
Solvent Debonder
2 oz
10.95
SC107
Pro Tips Extensions
Pkg 2
.95
SC108
Hot Tips Spout & Cap
Pkg 2
2.47
NCF QUICK ACCELERATOR
will
decrease cure time with only
a light mist applied from 8-12
inches away. Designed to flash
off instantly so do not over-apply
(you will see a wet look if you
use too much). Over-application
can discolor some surfaces –
especially stone.
SPOUT, CAP AND PRO TIP EXTENSIONS
Use
Pro Tip Extensions with the spout for greater
precision in glue application. Replacement
spouts and caps may become necessary if
glue drips on cap or clogs tip.
Above Items Can Not Ship By Air.
SUPER SOLVENT
used to debond
and dissolve CA glue from your
hands and other surfaces. A small
amount usually does the trick. Safe
to use with most paints and finishes
but testing on an inconspicuous
area is recommended.
SPECIAL T GAP FILLER
is a thick
gap filling glue with a viscosity
similar to honey (1150-1500 cps).
Used to fill large gaps and glue
parts that don’t fit well together as
well as fill cracks and gaps in handle
materials to preserve structure
integrity while sealing from moisture
and contaminants.
SUPER T GAP FILLER
is a medium
gap filling glue with a viscosity
similar to syrup (200-300 cps).
Perfect for gluing somewhat porous
materials and pieces which don’t fit
tightly. Cures within 10-25 seconds
giving you additional positioning
time. For best bond of two pieces,
apply to one piece and accelerator
to the other – push together and
hold tightly for 30 seconds.
HOT STUFF ORIGINAL
is a thin CA
glue with water-like viscosity (3cps).
Will wick into tight-fitting joints of
non-porous material. Fill and stop
spread of splits and hairline cracks in
wood & stone. Strengthen stone and
porous wood by applying to entire
surface, allow to soak into the pores
and cracks. Use as a final finish for
knife handles or pens. Cure time is
three to five seconds between tightly
fitting, non-porous parts.
Bond porous and non-porous materials
including; wood, metal, carbon fiber,
composites and plastics with this selection
CA glues. Store unopened bottles in the
freezer to extend shelf life. Opened bottles
experience a shorter shelf life if they are
continually taken in and out of cold storage.
CA Glues
& Fillers
CAT.#
DESCRIPTION SIZE PRICE
JE304
JE307
JE326
JE204
JE207
JE226
Super Fast Thin - Brush On
Medium - Brush On
Thick - Brush On
Super Fast Thin
Medium
Thick
1 oz.
1 oz.
1 oz.
2 oz.
2 oz.
2 oz.
9.95
9.95
9.95
12.95
12.95
12.95
CAT.#
DESCRIPTION-
CONTAINER
SIZE PRICE
JE315
JE615
JE202
Accelerator-Bottle/Brush
Accelerator-Aerosol Can
Debonder-Bottle/Brush
2 oz.
6 oz.
2 oz.
7.75
11.75
6.95
DESC.
VICOSITY GAP FILL CURE RATE
Thin
Medium
50 mPa-s
500 mPa-s
0.002”
0.006”
5-12 sec.
35-55 sec.
DESC.
VICOSITY GAP FILL CURE RATE
Thin
Medium
Thick
2 mPa-s
150 mPa-s
2000 mPa-s
0.002”
0.006”
.01” - .02”
Instant
10-20 sec.
60+ seconds
CAT.# DESCRIPTION COLOR SIZE PRICE
JE201
JE205
JE206
JE216
JE208
Thin
Medium
Thin
Medium
Thin
Clear
Clear
Black
Black
Brown
2 oz.
2 oz.
2 oz.
2 oz.
2 oz.
11.95
12.95
11.95
11.95
11.95
Made for knifemakers by knifemakers this CA
Glue is triple distilled to assure the highest
level of quality, performance and shelf-life.
This is the CA glue we put our name on!
20 month shelf life obtained when stored
unopened at 40* F. Can be refrigerated.
2oz bottles include one clog free nozzle
stopper, 2 long nozzle caps and 8 extension
applicator tip. 1 oz. glues sold with brush on
applicator in cap.
Knifemakers Specialty Accelerator speeds
up cure time of your CA glue with a quick
spray or brush on application. In that
hopefully rare instance you need to separate
glued parts or even yourself from your
project, apply debonder to break down the
CA glue separate parts.
Aerosol-Can Not Ship Air.
Standard CA Glue works to fill gaps, cracks
and hairline fissures that may occur as part
of the knifemaking process. Bonds closely
fitted parts for that perfect finish. Thin and
Medium can be used as a finish by applying
multiple coats, sanding and polishing to a
high gloss. Thick is ideal for filling larger
gaps and voids in materials. Clear in color.
Flexible CA Glue is the glue of choice when
working with flexible materials or natural
woods or other materials that swell and
contract as this flexible glue moves with your
project to help prevent cracking over time.
Provides impact and shock absorbance for
adhering moving parts. Available in clear,
black and brown to best match the job at
hand and provide the ultimate coverage
for filling voids. Clear can be mixed with
sawdust or colored ink or pigment to match
your project. Black CA Glue is rubber
toughened for added impact resistance.
Brown CA Glue dries ash brown in color.
• To enhance cure time use Knifemakers
Specialty Accelerator
ZAP A GAP Adhesives
Instant Adhesive
Standard CA Glue
Accelerator & Debonder
Flexible CA Glue
Knifemaker’s
Specialty
Knifemaker’s
Specialty
CA Glue for Knifemakers
by Knifemakers
For Knifemakers
by Knifemakers