385 / 1562
2/139
Articles marked ◊ are not held in stock, procurement is effected at short notice.
2
Cutting Tools
Saw blade quality:
HSS:
Fully hardened high-speed steel for use in harder materials
such as metal, aluminium and non-ferrous metals.
Bimetal:
Highly flexible, almost non-breakable combination of HCS
and HSS, long service life. Can be used for hard woods, abrasive
ooden materials, hard plastic, non-ferrous metals and metals.
Order
No.
Bosch No.
2738
2739
Cutting
length
mm
Material
Metal
mm
Tooth pitch
mm
Type of tooth Use
0025
T 118 A
26.40
30.40
67
HSS
1–3 progressive
1.1–1.5
Milled,
wavy set
For thin metal sheets, with plunge tip.
0045
T 118 AF
–
40.20
67
Bimetal
1–3 progressive
1.1–1.5
Milled,
wavy set
For thin metal sheets.
(248)
(247)
Jig saw blades for metal in storage box
Order
No.
Bosch No.
2736
Cutting length
mm
Material
Metal
mm
Tooth pitch
mm
Type of tooth
Use
0057
T 118 GFS
11.40
57
Bimetal
0.5–1.5
0.8
Wavy set;
milled
For stainless steel materials.
0068
T 118 EFS
11.40
57
Bimetal
1.5–4
1.4
Wavy set;
milled
For stainless steel materials.
0108
T 118 AHM
21.10
59
TC
1.5–3
1.1
carbide tipped;
ground
For working thin stainless steel sheets,
with reduced stroke rate, cooling,
without orbital action.
0109
T 118 EHM
21.10
59
TC
2–5
1.4
carbide tipped;
ground
For working medium stainless steel sheets,
with reduced stroke rate, cooling,
without orbital action.
(247)
Jig saw blades for stainless steel
Tooth design:
Teeth milled, side clearance wavy set:
Blade
with fine result for straight cuts in plywood, soft
steel, aluminium, non-ferrous metals and plastics.
Design: 25 pieces in a box.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt,
LU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.
Saw blade quality:
Bimetal:
Highly flexible, almost non-breakable combination of HCS
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Carbide-tipped:
The HSC blade is equipped with carbide teeth and
is thus suitable for abrasive materials such as glass-fibre-reinforced
plastics, asbestos cement, hard woods and aerated concrete.
Tooth design:
Teeth milled, side clearance wavy set Blade with fine result for
straight cuts in soft steel, aluminium non-ferrous metals and
plastics.
Tooth pitch:
Small tooth pitch for fine cuts with slower work
progress, in hard and/or thin material such as
metals and non-ferrous metals.
Application:
Saw blades are subject to high mechanical and thermal loads.
For this reason, the use of specific coolants e.g. cutting oil (for steel,
metals) is recommended in order to extend the wear-resistance of
the saw blade.
Design: 5 pieces on card,
(exception: 2736 0109, 3 pieces on card.)
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi,
Mafell, Makita, Metabo, Protool.
Jigsaw blades
Not all items are available in every country.
385