383 / 1562
2/137
Articles marked ◊ are not held in stock, procurement is effected at short notice.
2
Cutting Tools
Tooth pitch:
Small tooth pitch for fine cuts
with slower work progress, in hard and/or thin
material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with
fast work progress in soft and/or thick material
such as wood and plastic.
Jig saw blades for special applications
2735
Saw blade quality:
Carbide-tipped:
The HSC blade is equipped with carbi-
de teeth and is thus suitable for abrasive materials such
as glass-fibre-reinforced plastics, asbestos cement, hard
woods and aerated concrete.
2736
Saw blade quality:
HSS:
Fully hardened high-speed steel for use in harder
materials such as metal, aluminium and non-ferrous
metals.
Bimetal:
Highly flexible, almost non-breakable combination
of HCS and HSS, long service life. Can be used for hard
woods, abrasive wooden materials, hard plastic, non-fer-
rous metals and metals.
Carbide-tipped:
The HSC blade is equipped with carbi-
de teeth and is thus suitable for abrasive materials such
as glass-fibre-reinforced plastics, asbestos cement, hard
woods and aerated concrete.
Tooth design: Teeth milled, side clearance side set:
Blade with relatively coarse cut and fast work progress in hard
and soft wood, aluminium, plastics and non-ferrous metals.
Order
No.
Bosch No.
2735 2736
Cutting
length
mm
Material Wood
mm
Plastic
mm
Tooth
pitch
mm
Type of tooth
Use
0008
T 101 BIF
–
12.85
59 Bimetal
1.5–15 –
1.7
Lead angle ground,
teeth ground
Specially designed for laminate, plastic-
coated boards and multiplex boards.
0056
T 301 CHM
–
31.40
91
TC
–
65
3.3
Carbide-tipped,
ground
Specially designed for GRP and Corian.
0071
T 101 A
–
11.05
74 HSS
–
2–20
2
Lead angle ground,
teeth ground
For fine, straight cuts, ideal for Plexiglas
and polycarbonate.
0107
T 341 HM
–
31.40
106
TC
–
5–80 4.3
Carbide-tipped;
side set
For fast, straight cuts, ideal for glass fibre rein-
forced plastics, cement fibre boards, plasterboard.
0110
T 141 HM
10.20 11.80
74
TC
–
5–50 4.3
Carbide-tipped;
side set
Specially designed for GRP, plasterboard, cement fibre boards.
(248)
(247)
Saw blade quality:
HSS:
Fully hardened high-speed steel for use in harder materials such
as metal, aluminium and non-ferrous metals.
Bimetal:
Highly flexible, almost non-breakable combination of HCS
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Carbide-tipped:
The HSC blade is equipped with carbide teeth and
is thus suitable for abrasive materials such as glass-fibre-reinforced
plastics, asbestos cement, hard woods and aerated concrete.
Tooth design: Teeth milled, side clearance side set:
Blade with
relatively coarse cut and fast work progress in hard and soft wood,
aluminium, plastics and non-ferrous metals.
Tooth pitch:
Small tooth pitch for fine cuts
with slower work progress, in hard and/or thin
material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress
in soft and/or thick material such as wood and plastic.
Application:
Saw blades for clean cutting results in typical commercial
plastics and moulds.
Design: 5 pieces on card, T 108 BHM, and T 301 CHM
3 pieces on card.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool,
Hitachi, Mafell, Makita, Metabo, Protool.
Order
No.
Bosch No.
2736
Cutting length
mm
Material
Plastic
mm
Tooth pitch
mm
Type of tooth
Use
0150
T 102 D
8.40
100
HCS
5–30
4.0
Lead angle ground,
teeth ground
For the problem-free, clean sawing of
polypropylene (PP) and similar soft
thermoplastic materials.
0155
T 102 H
8.40
100
HCS
3–30
2.3
Lead angle ground,
teeth ground
For the problem-free, clean sawing of PVC
and similar soft thermoplastic materials.
0160
T 302 H
12.40
132
HCS
3–65
2.3
Lead angle ground,
teeth ground
For PVC (polyvinyl chloride), is often used
for windows and structural elements.
0165
T 102 BF
11.10
92
BIM 2–20
1.8
ground,
side set
For the clean, splinter-free sawing of PMMA
(polymethyl methacrylate), is used e.g. for
balcony panelling and shower doors.
0170
T 108 BHM
22.20
92
TC
0–20
2.2
Carbide-tipped,
ground
For the clean sawing of CRP and similar
plastics such as carbon fibres.
0175
T 301 CHM
31.00
117
TC
0–65
3.3
Carbide-tipped,
ground
For the problem-free cutting of Corian® and
similar solid surface materials such as Varicor®.
(247)
Jig saw blades for plastics
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/
or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in
soft and/or thick material such as wood and plastic.
Application:
Saw blades are subject to high mechanical and thermal loads. For this
reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or
water (for aluminium, INOX, thin sheets), is recommended in order to
extend the wear-resistance of the saw blade.
Design: 5 pieces on card,T 341 HM, 3 pieces on card. T 141 HM,
1 blade on card.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi,
Mafell, Makita, Metabo, Protool.
Jigsaw blades
Not all items are available in every country.
383