386 / 1562
2/140
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
2
Cutting Tools
Saw blade quality:
Carbide-tipped:
The HSC blade is equipped with carbide teeth and is thus suitable for
abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods
and aerated concrete.
Application:
Saw blades are subject to high mechanical and thermal loads. For this reason, the use of
specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets),
is recommended in order to extend the wear-resistance of the saw blade.
Design:
3 pieces on card.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita,
Metabo, Protool.
Order
No.
Bosch No.
2736
Cutting length
mm
Material
Ceramic materials
mm
Type of tooth
Use
0111
T 130 Riff
12.15
59
TC
5–15
Carbide-tipped
For soft ceramic wall tiles, GRP,
cast iron, coarse cut.
(247)
Jig saw blade for ceramic products
Saw blade quality:
HCS:
High carbon steel for use in softer materials such as wood, wood fibre boards and
plastics.
HSS:
Fully hardened high-speed steel for use in harder materials such as metal, aluminium
and non-ferrous metals.
Bimetal:
Highly flexible, almost unbreakable combination of HCS and HSS. The area of applica-
tion covers hard wood, abrasive wooden materials, hard plastics, non-ferrous metals and metals.
Tooth design:
Teeth milled, side clearance side set.
Blade with relatively coarse cut and fast work progress
in hard and soft wood, aluminium, plastics and non-ferrous metals.
Teeth milled, side clearance lead angle ground.
Blade with taper ground back for side
clearance; for precise, fine and clean cuts in wood and plastic.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as
metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material
such as wood and plastic.
Application:
Saw blades are subject to high mechanical and thermal loads. For this reason, the use of
pecific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets),
is recommended in order to extend the wear-resistance of the saw blade.
Design: 5 pieces on card.
Suitable for FEIN.
Order
No.
Bosch No.
2736
Total
length
mm
Material
Metal
sheets
mm
Soft
wood
mm
Tooth
pitch
mm
Type of tooth
Use
0180
F 1 D
6.70
88
HCS
– 10.0–45.0 4.0
Lead angle ground,
teeth ground
For soft wood, chipboard, wood core
plywood, fibre boards (10-45 mm).
0185
F 18 G
6.70
77
HSS 0.5–1.5
–
0.7
Wavy,
milled
For very thin metal sheets (0.5–1.5 mm).
0190
F 18 AF
9.70
88
BIM 1.0–3.0
–
1.2
Wavy,
milled
For thin metal sheets (1–3 mm).
0195
F 18 BF
9.70
88
BIM 2.5–6.0
–
2.0
Wavy,
milled
For medium sheets (2.5–6 mm).
0200
F 127 DF
10.20
100
BIM 3.0–15.0 –
3.0
Side set,
milled
For thin to thick sheets (3-15 mm).
(247)
Jig saw blades for wood and sheet, suitable for FEIN jig saws
m
Jigsaw blades
386