562 / 1562
3/22
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
3
Clamping
Systems
Design:
Body and tip drop forged, hardened and ground. Moving tip is regrindable for several times
and shank-mounted, with
tip angle 60°.
The precision bearing is protected from dirt and coolant by
the special lip seal. The shank is ground, with hole for easy dismantling. The permissible load is
reduced by the extended moving tip. With short projection length and low-vibration running.
Application:
For precision turning and roughing, can be universally used on all types of lathes.
Particularly suitable for copy turning.
The extended tip enables unobstructed movement of the
sliding rests.
Order No.
0005
0010
0015
0020
0025
Morse taper
MK
1
2
3
4
5
3306
230.00
230.00
280.00
320.00
462.00
Size
101
102
106
108
110
Size A
mm
70.5
75
95.5
114.5
143.5
Size B
mm
34.5
43
58.5
68.5
88.5
Size D
mm
15
20
25
32
40
Measurement G
mm
12.065
17.78
23.825
31.267
44.399
Size J
mm
9
10
12
14
16
Size K
mm
27
34
47
53
65
max. radial eccentricity
mm
0.01
0.005
0.005
0.005
0.005
max. workpiece weight
kg
80
140
400
500
1200
Speed
max. min
-1
7000
7000
5000
3800
3000
(309)
Revolving lathe centre with extended moving tip
Design:
Body and tip drop forged, hardened and ground. Moving tip is
carbide coated
and shank-mounted, with
tip angle 60°.
The precision bearing is protected from dirt
and coolant by the special lip seal. The shank is ground, with hole for easy dismantling.
With short projection length, low-vibration running and jacknut.
Application:
For precision turning and roughing, can be universally used on all types
of lathes.
Order No.
0005
0010
0015
0020
0025
Morse taper MKMorse
2
3
4
5
6
3307
532.00
◊
616.00
◊
682.00
◊
1070.00
◊
1840.00
◊
Size
102
106
108
110
114
Size A
mm
65
79.5
102.5
129
152
Size B
mm
45
60
70
90
105
Size C
mm
11
14
14
18
18
Size D
mm
20
25
32
40
50
Measurement G
mm
17.78
23.825
31.265
44.399
63.348
Size K
mm
24
31
41
50.5
57.5
Size M
mm
56
74
82
105
120
max. radial eccentricity
mm
0.005
0.005
0.005
0.005
0.01
max. workpiece weight
kg
120
360
500
1000
1800
Speed max.Morse taper
7000
5000
3800
3000
2600
(309)
Revolving tailstock centres with jacknut and carbide insert
Design:
Body and tip drop forged, hardened and ground. Moving tip is regrindable for several
times and shank-mounted,
with low 60° VL tip angle deflection.
The precision bearing is
protected from dirt and coolant by the special lip seal. The shank is ground, with hole for easy
dismantling.
High load capacity thanks to particularly strong construction and bearings, with jacknut.
Application:
Specially developed for use on NC machines, where there are especially tight
requirements, also suitable on all other lathes.
Order No.
0005
0010
0015
Morse taper
MK
4
5
6
3309
815.00
1265.00
2225.00
Size
484
485
486
Size A
mm
122
150
180
Size B
mm
70
95
120
Size D
mm
16
20
26
Measurement G
mm
31.267
44.399
63.348
Size K
mm
44
59
77
Size M
mm
100
125
155
max. radial eccentricity
mm
0.005
0.005
0.005
max. workpiece weight
kg
1000
2000
3000
Speed
max. min
-1
7000
6000
4800
(309)
Revolving lathe centre with extended moving tip and jacknut for high loads
Tailstock centres
562