565 / 1562
3/25
Articles marked ◊ are not held in stock, procurement is effected at short notice.
3
Clamping
Systems
Design:
CoA small range of products, clamping diameter 12–50 mm, turning range
13–100 mm, hydraulic. Supplied in wooden case.
Application:
For efficient turning of workpieces over their entire length in one setup with
greater accuracy. Design based on the modular principle, therefore universal exchange of
driving discs and centring points possible.
Hydraulic or mechanic pressure equalisation
results in uniform clamping force even on uneven workpiece faces. Workpiece face longitudinal
stop by spring-loaded centring point.
Supplied:
Constant face driver range of products with 1 base, 4 driving cutters, clamping
diameters 12 –20 –32 –50 mm and 2 centring points, dia. A = 6 + 12 mm.
Order
No.
MK
3340
Running direction
0005
3
900.00
right
0010
3
900.00
◊
left
0015
4
921.00
right
0020
4
921.00
◊
left
0025
5
975.00
◊
right
0030
5
975.00
◊
left
0035
6
1115.00
◊
right
0040
6
1115.00
◊
left
(311)
Constant face driver range of products CoA
Design:
CoE range of products, clamping diameter 12–50 mm, turning range 13–100 mm.
Supplied in wooden case.
Application:
Ideally suitable for efficient turning of workpieces over their entire length in one
setup with high accuracy. At the same time, a groove or serration can be milled. This can e.g.
save changeover to a vice which translates into savings in time and costs. Design based on the
modular principle, therefore universal exchange of driving discs and centring points possible.
Mechanic pressure equalisation
results in uniform clamping force even on uneven workpiece
faces. Workpiece face longitudinal stop by spring-loaded centring point.
Supplied:
Constant face driver range of products with 1 base, 4 driving plates, clamping
diameters 12 –20, 32 and 50 mm as well as 3 centring points, dia. 12, 20 and 32–50 mm.
Order
No.
MK
3341
Running direction
0005
3
1050.00
◊
Right or left
0010
4
1080.00
◊
Right or left
0015
5
1130.00
◊
Right or left
(311)
Constant face driver range of products CoE
Design:
With cylindrical shank for clockwise and counterclockwise rotation, with a speed range
of up to 60000 min
-1
and internal cooling.
Balancing quality:
G2.5 25000 min
-1
.
Application:
For the transmission of high holding forces and torques in the smallest space.
Order
No.
Clamping
range
d
1
mm
3401
Holding
fixture
d
2
Outer dia.
D
mm
Open
length
L
mm
Length,
closed
L
1
mm
Shank
length
l
mm
1008
0.2–3.4
407.00
10
19
70
73
40
1010
0.2–3.4
427.00
10
19
100
103
70
1016
0.2–3.4
469.00
10
19
160
163
130
1608
0.2–3.4
407.00
16
19
80
83
50
1610
0.2–3.4
427.00
16
19
100
103
70
1616
0.2–3.4
469.00
16
19
160
163
130
2008
0.2–3.4
407.00
20
19
80
83
52
2010
0.2–3.4
427.00
20
19
100
103
72
2016
0.2–3.4
469.00
20
19
160
163
32
(325)
MICRO universal chuck
3401 1008
3401 1608
3401 1616
d
2
d
1
D
L
1max
L
l
m
Tailstock centres and accessories
Not all items are available in every country.
565