572 / 1562
3/32
3
Clamping
Systems
The seat belt for your tools
COOL FLASH
Cooling taken to extremes
According to the motto „Making the Good Even
Better“ HAIMER has developed the new
COOL FLASH
SYSTEM
for shrink-fit holders on the basis of the
existing Cool-Jet. The coolant lubricant emerges
through several slots, slides along the cutter and
cools to the cutting edge of the tool!
COOL-FLASH advantages:
• Optimum jet guidance to the cutting edge
• Up to 100% longer life
• No more balls of chips on the tool
• Even at high speeds
• Optimum spinning! No longer out of balance!
No disturbing contours!
• Low cost and subsequent installation is possible
In high-performance cutting (HPC) it can happen that
the tool is pulled out of the chuck. This is due to a slow
micro creep motion. It occurs during machining with
high torque and high attractive forces. Even chucks with
extremely high holding force cannot prevent the micro
creep. In this way high quality workpieces become
scrap.
SAFE-LOCK
™ system offers a remedy. Driver
elements in the chuck engage in grooves on tool shank.
In addition to the frictional clamping forces of the shrink
fit chuck, the tool is held positively. Thus, the micro-
creep is effectively prevented and your tool holds.
Chuck and accessories
572