665 / 1562
3/125
Articles marked ◊ are not held in stock, procurement is effected at short notice.
3
Clamping
Systems
Design:
High accuracy and wear resistance due to precise, hardened
jaw guides. Stepwise clamping force presetting. Optimal coolant and
chip flow due to optimised design.
Application:
For use on machining centres and machine tools with
high working accuracy.
Order
No.
Jaw width
mm
3835
Jaw span
mm
Jaw height
mm
Total length
mm
Tension force
kN
Weight
kg
0113
113
1300.00
170
31.6
583
30
24
0135
135
1600.00
220
39.6
679
40
39
0160
160
2000.00
310
49.6
817
50
60
(331)
Machine vice - mechanical power boosted
Design:
Body and jaws made of hardened steel (60 HRC) and
ground. The tolerance range is within 0.02 mm. Draw-down
jaws also lockable. Fastening is done by grid holes or jaws.
Application:
For use on machining centres and machine tools
with high working accuracy.
Note:
Rotation plate upon request.
Order
No.
Jaw width
mm
3836
Jaw span
mm
Jaw height
mm
Total length
mm
Tension force
kN
Weight
kg
1125
125
453.50
150
40
401
30
12.7
1152
150
544.50
200
50
487
50
25.6
1153
150
679.50
300
50
587
50
29.5
1175
175
952.00
400
60
701
60
51.2
(336)
Machine vice - mechanical
Design:
Mechanical, hydraulic drive with hand crank. Steel body, with
uniform drop-forged, fixed jaw. All parts prone to wear, especially
jaw guides, are hardened and ground. The slim design allows space-
saving clamping side by side. Exact ±0.01 mm height adjustment upon
customer request. Blocking device for pre-clamping of workpieces.
Self-retightening action in the hydraulic unit by built-in disc springs.
Can be clamped base side, lateral or front side (front side clam-
ping with bracing angle).
A gas spring stops the unlocked jaw from
dropping. Quick adjustment of the clamping range via locking pin. The
short design of the movable jaw (made of steel) allows a reduced ove-
rall length even at max. clamping width. Additional stepped or special
form jaws (see accessories) can be fixed on the top of the stationary
and movable jaws. Robust flat guidance of the movable jaw. The drive
spindle is protected against dirt and chips.
Application:
For universal use on milling machines and machining
centres.
Note:
Form jaws and angle drive upon request.
Order
No.
Size
3838
Jaw width
mm
Jaw span
mm
Total length
mm
Tension force
kN
Weight ca.
kg
0092
1
1500.00
92
100
490
25
15.5
0113
2
1500.00
113
170
583
30
24.0
0135
3
1600.00
135
220
681
40
39.0
0160
4
2250.00
160
310
817
50
60.0
(332)
NC power clamp RBA - mechanical/hydraulic
m
Machine vices and accessories
Not all items are available in every country.
665