669 / 1562
3/129
Articles marked ◊ are not held in stock, procurement is effected at short notice.
3
Clamping
Systems
Design:
With hardened claw tips. Thus the clamping forces are increased by factor 3–5 in
contrast to standard jaws and 5-side machining is enabled in one clamping. This results in less
loss of material on the workpiece, shorter machining times as well as shortened production and
costs per piece.
Application:
Can be used for manual or hydraulic clamping of unmachined and sawn parts on
vices.
Universally usable by screwing onto the RÖHM NC compact clamping system.
Clever alternative to stamping.
Order
No.
For jaw width
mm
3847
3859
∅ c
mm
B
mm
C
mm
a
mm
b
mm
0092
92
340.00
◊
280.00
◊
7 (M6) 14 32 63 13.6
0125
125
420.00
350.00
9 (M8) 16 40 80 15.6
0160
160
590.00
490.00
9 (M8) 18 50 100 19.6
(335)
(335)
Sets of claw jaws for NC compact clamping systems.
3847
Claw jaw SKB with fine stage.
3859
Claw jaw SKB without fine stage.
Design:
Steel body and guides are hardened and ground on all sides. Short, compact design
with large clamping stroke and constant clamping force.
Application:
Ideal for use on machining centres, milling machines and grinding machines.
Particularly suitable for 5-sided machining.
Supplied:
Compact clamping system with stepped jaws.
Note:
For clamping jaws and set of T-nuts see
Ç
3/128.
Order
No.
Jaw width
mm
3858
Jaw height
mm
Jaw span
mm
Tension force
kN
Weight
kg
0005
50
1100.00
◊
20
0–39
10
3.5
0015
70
1300.00
◊
25
0–58
15
7.0
0020
92
1900.00
32
0–76
20
18.0
0025
125
2400.00
40
0–97
25
32.5
(333)
NC compact centric vice
Design:
With internal octagon. For compact clamping system RKZ-M.
Order
No.
for size
3848
Internal octagon x length
mm
1110
50
28.00
12 x 80
1115
70
28.00
14 x 125
1120
92
35.00
19 x 160
1125
125
42.00
19 x 200
(335)
Hand crank
Design:
For torque spanners. For central clamp RKZ-M.
Order
No.
for size
3848
Hexagon x square spanner size
2050
50
55.00
8 x 12
2070
70
55.00
10 x 14
2100
92/125
75.00
14 x 19
(335)
Drive adapter
3847
3859
Clamping solutions such as the embossing method are fully respon-
ding to current trends. In the process, a mark is being embossed onto
the workpiece in an embossing station. Special embossing jaws grip
exactly into these small recesses on the clamping action into the vice.
Exactly this very effect the innovative RÖHM claw jaws offer. Yet using
this technology, your goals will be achieved even faster and more cost-
effectively. Because ‘embossing’and clamping are carried out in one
single processing step –and you can spare an embossing station.
Machine vices and accessories
Not all items are available in every country.
669