673 / 1562
3/133
Articles marked ◊ are not held in stock, procurement is effected at short notice.
3
Clamping
Systems
Design:
Body and jaws made of alloyed tool steel, hardened and precision ground on all sides.
The stationary jaw is smooth, the movable jaw comes with horizontal ground prism. Clamping
and releasing through threaded spindle. Side clamping surfaces for clamping jaws. Supplied in
wooden case.
Angularity:
100 mm = 0.005 mm,
Parallelism:
100 mm = 0.002 mm.
Application:
Mainly in tool-making on grinding, milling and
engraving machines, on boring machines, for measuring and
inspection work and for manufacturing activities that demand
highest clamping accuracy.
Order
No.
Size
3879
Jaw width
mm
Jaw span
mm
Jaw height
mm
Total height
mm
Total length
mm
Tension force
kN
Weight
kg
0060
0
200.00
60
55
25
50
110
2
1.6
0070
1
250.00
73
100
35
67
210
4
4.0
0090
2
300.00
88
125
40
88
250
4
7.6
(337)
Precision vices PL-G with threaded spindle
Order
No.
Size
3881
Jaw width
mm
Jaw span
mm
Jaw height
mm
Total height
mm
Total length
mm
Tension force
kN
Weight
kg
0070
1
1950.00
70
80
30
93
160
6
5.3
0090
2
2950.00
90
120
40
113
210
7
11.0
(337)
Precision sine vice PS-SV with front pivot axis
Formula for calculating the gauge block x
x = sin
α
• K
(for support surface A)
x = sin
α
• K + 1 (for support surface B)
Example:
Wanted: Gauge block for angle adjustment of 24° 15‘ on the Precision sine bar machine vice PS-SV.
Given: K = 100, sin
α
= 0.4107.
Calculation: x = 0.4107 • 100 = 41.07.
The height of the gauge block 41.07 mm.
Design:
From special cast iron, clamping surface and guides ground. Flatness accuracy is
0.03 mm, lead accuracy over 100 mm is 0.01 mm. The dove tail guides are adjustable by
guide rails. Whirled trapezoidal threaded spindle with axial bearings. Graduated drums with
zero point adjustment, thus direct reading without conversion possible.
With scale division 0.05 mm.
Tables from 450 x 240 mm on are equipped with gully as well
as clamping lever in both axes allowing clamping in any position.
Application:
For use on drilling machines
and for light milling work.
Note:
Other designs and dimensions upon
request.
Order
No.
Clamping
surface
mm
3997
No. of
T-slots
T-slots
width
mm
Distance
of T-slots
mm
Longitudinal
movement
mm
Cross
motion
mm
Spindle
pitch
mm
Load bearing
capacity
kg
Full
height
(-0.01)
Area
mm
Weight
kg
0010
300 x 160
1083.00
3
10
50
180
100
2
75
78 160 x 160 16
0020
450 x 240
1981.00
◊
3
14
60
275
155
5
280
126 259 x 200 52
0030
580 x 240
2071.00
◊
3
14
60
375
155
5
280
126 259 x 200 60
(395)
Coordinate table with dovetail guide
Design:
Body and jaws made of alloy tool steel, hardened and precision ground.
The stationary jaw is smooth, the movable jaw comes with horizontal ground
prism. Clamping and releasing through threaded spindle. Angle
adjustment with a setting range of 0°–46° is performed using
gauge blocks according to the sinus principle; bearing pins and
headed dowels are hardened and ground to an accuracy of 0.001
mm. The clamping device can be positively locked in every angular
position. Supplied in wooden case.
Angularity:
100 mm = 0.005 mm,
Parallelism:
100 mm = 0.002 mm,
Angular deviation at 45° ±15" .
Application:
For high working accuracy in tool-making when
grinding, milling, measuring, etc.
Coordinate table
Not all items are available in every country.
673