671 / 1562
3/131
Articles marked ◊ are not held in stock, procurement is effected at short notice.
3
Clamping
Systems
Design:
With hardened claw tips. Thus the clamping forces are incre-
ased by factor 3–5 in contrast to standard jaws and 5-side machining
is enabled in one clamping. This results in less loss of material on the
workpiece, shorter machining times as well as shortened production
and costs per piece.
Application:
Can be used for manual or hydraulic clamping of un-
machined and sawn parts on vices.
Universally usable by screwing
onto the RÖHM NC compact clamping system.
Clever alternative
to stamping.
Order
No.
For jaw width
mm
3847
3859
B
mm
C
mm
a
mm
b
mm
∅ c
mm
0125
125
420.00
350.00
16
40
80
15.6
M9–8
(335)
(335)
Sets of claw jaws for NC compact clamping systems.
Clamping solutions such as the embossing method are fully
responding to current trends. In the process, a mark is being embossed
onto the workpiece in an embossing station. Special embossing jaws
grip exactly into these small recesses on the clamping action into the
vice. Exactly this very effect the innovative RÖHM claw jaws offer. Yet
using this technology, your goals will be achieved even faster and more
cost-effectively. Because ‘embossing’and clamping are carried out in one
single processing step –and you can spare an embossing station.
3847
Claw jaw SKB with fine stage.
3859
Claw jaw SKB without fine stage.
3859
3847
Order
No.
Jaw width
mm
3863
3864
Height
mm
0125
125
50.00
62.50
39.7
(335)
(335)
Normal jaw set
3863
Type SGN, one side smooth, one side grooved.
3864
Type SGNf, one side finely grooved, one side with longitudinal grooves.
Design:
Hardened and with vertical and horizontal grounded prisms.
For combination with SGN.
Order
No.
Jaw width
mm
3841
Height
mm
0135
135
96.50
39.6
(332)
Prisim jaw set SPR
Design:
With spring plate, hardened and ground.
Order
No.
Jaw width
mm
3863
Height
mm
0135
135
193.00
39.6
(335)
Pull down jaw set SNF
Design:
Unhardened and burnished with workpiece support.
Supplied:
Prism jaw and normal jaw.
Order
No.
Jaw width
mm
3842
Height
mm
0135
135
73.50
39.8
(332)
Prisim jaw set SBO
m
m
Machine vices and accessories
Not all items are available in every country.
671