719 / 1562
3/179
Articles marked ◊ are not held in stock, procurement is effected at short notice.
3
Clamping
Systems
Design:
With transverse pole pitch in
reinforced magnetic design.
The double and enhanced permanent-ceramic magnet system
distributes the clamping force extremely high and evenly. A long and
maintenance-free service life is ensured by the massive cast iron base
body and robust upper plate as well as through the magnetic system.
Machining of the upper plate without impairing the holding force is
possible up to a depth of 15 mm in steel and 7 mm in NFM materials.
Attachment on the machining tables is done using 2 clamping jaws.
Lines of force:
approx. 10 mm above the pole plate,
therefore no magnetisation of the tools.
Holding force:
max. 120–150 N/cm
2
with ground workpiece
clamping surface.
Application:
Für difficult cutting machining. Ideal for milling,
planing, drilling, grinding and eroding.
Supplied:
Clamping plate with 2 stop bars.
Note:
Further dimensions upon request.
Machining of the upper plate without impairing the holding force is
possible up to a depth of 15 mm in steel and 7 mm in NFM materials.
The clamping plates are normally supplied with 2 stop bars.
Order
No.
Table surface A x B
mm
3959
Pole pitch
mm
Base area C x D
mm
F
mm
Weight
kg
0010
250 x 150
973.00
◊
St 8/NE 5
260 x 145
93
20
0020
300 x 150
1094.00
◊
St 8/NE 5
310 x 145
93
24
0030
350 x 150
1208.00
◊
St 8/NE 5
360 x 145
93
28
0040
400 x 200
1690.00
◊
St 8/NE 5
395 x 195
93
39
0050
500 x 200
1953.00
◊
St 8/NE 5
495 x 195
93
49
0060
600 x 200
2274.00
◊
St 8/NE 5
595 x 195
93
64
(350)
BM permanent-magnetic clamping plate
Design:
With transverse pole pitch A strong permanent-ceramic magnet
system with low installation height and narrow pole pitch enables
deployment for many tasks. A long and maintenance-free service life
is ensured by the cast iron base body and robust upper plate as well
as through the magnetic system. Machining of the upper plate without
impairing the holding force is possible up to a depth of 15 mm in steel
and 7 mm in NFM materials. Attachment on the machining tables is
done using 2 clamping jaws.
Lines of force:
approx. 8 mm above the pole plate,
therefore no magnetisation of the tools.
Holding force:
max. 80–100 N/cm
2
with ground workpiece
clamping surface.
Application:
Ideal for machining on surface grinding machines.
Can furthermore be used on spark erosion systems.
Supplied:
Clamping plate with 2 stop bars.
Note:
Further dimensions upon request.
Machining of the upper plate without impairing the holding force is
possible up to a depth of 15 mm in steel and 7 mm in NFM materials.
The clamping plates are normally supplied with 2 stop bars.
Order
No.
Table surface A x B
mm
3958
Pole pitch
mm
Base area C x D
mm
F
mm
Weight
kg
0010
250 x 150
762.00
◊
St 6/NE 5
258 x 147
65
15
0020
300 x 150
884.50
◊
St 6/NE 5
308 x 147
65
18
0030
350 x 150
981.00
◊
St 6/NE 5
358 x 147
65
21
0040
400 x 200
1430.00
◊
St 6/NE 5
413 x 197
72
32
0050
450 x 200
1556.00
◊
St 6/NE 5
463 x 197
72
36
0060
500 x 200
1691.00
◊
St 6/NE 5
515 x 197
72
40
(350)
BM permanent-magnetic clamping plate
Magnetic clamping devices
Not all items are available in every country.
719