720 / 1562
3/180
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
3
Clamping
Systems
Design:
With transverse pole pitch and extremely low installation
height. The high-energy neodymium-iron-boron NdFeB (noble earths)
magnet system, the small installation height and the finest pole pitch
offer a great variety of application options. The massive construction
of the base body and the stable upper plate as well as the high-energy
magnetic system ensure an extremely long and maintenance-free
service life. All clamping plates are equipped with a removable shift
lever. Machining of the upper plate without impairing the holding force
is possible up to a depth of 5 mm. Attachment on the machining tables
is done using 2 clamping jaws.
Holding force:
Max. 70-80 N/cm
2
on ground workpiece
clamping surface.
Application:
The clamping plates haven been specially designed for
clamping very thin and small workpieces. The clamping systems can
also be used on spark erosion systems.
Supplied:
Clamping plate with 2 stop bars.
Note:
Further dimensions upon request.
The upper plate can be machined up to a depth of 5 mm without
impairing the holding force. The clamping plates are supplied
with 2 stop bars as standard.
Order
No.
Table surface A x B
mm
3960
Pole pitch
mm
Base area C x D
mm
Overall height F
mm
Weight
kg
0010
150 x 100
674.00
◊
St 1.5/NE 0.8
165 x 100
40
5
0020
250 x 150
866.00
◊
St 1.5/NE 0.8
265 x 150
40
13
0030
350 x 150
1106.00
◊
St 1.5/NE 0.8
365 x 150
40
18
0040
450 x 150
1365.00
◊
St 1.5/NE 0.8
465 x 150
40
23
(350)
BM permanent-magnetic clamping plate
Design:
With finest transverse pole pitch, easily swivelling along the
longitudinal axis and permanent-magnetic clamping plates. The high-
energy neodymium-iron-boron NdFeB (noble earths) magnet system
and the finest pole pitch offer a great variety of application options. The
massive construction and the stable upper plate as well as the high-
energy magnetic system ensure an extremely long and maintenance-
free service life. All clamping plates are equipped with a removable
actuating lever. The sine bar clamping table is of all-steel construction,
can be swivelled up to 75° and has an extremely low installation height.
The gauge blocks can be adjusted up to 45°. The contact surface for
gauge blocks is 2 mm below the 0 line, thereby enabling the setting
of very small angles, the adjustment accuracy of the angle is ± 5 s.
Machining the top plate without affecting the adhesive force is possible
up to a depth of 5 mm. Attachment on the machining tables is done
using clamping jaws.
Line of force:
Magnetic field build-up during use is minimal,
consequently, the residual magnetism is of no significance.
Holding force:
Max. 70-80 N/cm
2
on ground workpiece
clamping surface.
Application:
Ideal for extremely precise grinding of very thin and small
workpieces with non-parallel surfaces. The angles can bet set using
gauge blocks. The table needs to be locked into place on the main shaft
in order to avoid any oscillations during the grinding process.
The clamping systems can also be used on spark erosion systems.
Supplied:
Sine table with 2 stop bars and a sine lookup table.
Note:
Further dimensions upon request.
The upper plate can be machined up to a depth of 5 mm without
impairing the holding force. The clamping plates are supplied
with 2 stop bars as standard.
Order
No.
Table surface A x B
mm
3961
Pole pitch
mm
Base area D x E
mm
Overall height F
mm
Size C
mm
Weight
kg
0010
250 x 150
2228.00
◊
St 1.5/NE 0.8
250 x 150
77
125
18
0020
300 x 150
2519.00
◊
St 1.5/NE 0.8
300 x 150
77
125
26
(350)
BM precision sine bar clamping table
Magnetic clamping devices
720