736 / 1562
4/8
Dial calipers/digital pocket calipers
DIN
862
INOX
DIN
862
INOX
Order
No.
Measurement
range mm
4013
Reading
mm
Pointer revolution
mm
Jaw length
mm
0150
150
37.20
0.02
2
40
0151
150
40.70
0.01
1
40
(401)
Design:
Made of stainless steel, hardened. With locking screw, revolving scale face, diameter
32 mm and
rectangular depth gauge.
Slide with metal housing. Supplied in plastic case.
Application:
For inner, outer, depth and step measurements.
Order
No.
Measure-
ment range
mm
4015
Design
Reading
mm
Pointer
revolution
mm
Jaw
length
mm
1150
150
125.00
Without drive roller
0.02
2
40
1151
150
133.00
Without drive roller
0.01
1
40
1200
200
222.00
m
With drive roller
0.02
2
50
1300
300
370.00
m
With drive roller
0.02
2
64
(495)
Dial calipers CCMA-M
Without drive roller
Patented shockproof dial.
Design:
Made of stainless steel, hardened, measuring faces precision ground, with locking
screw, digit height of LCD 12 mm, with data output RS 232. Supplied with battery CR 357,
1.5 V, in plastic case.
Function:
On and off switch, mm/inch-conversion, reset (zero setting) possible in any position.
Application:
For inner, outer, depth and step measurements.
Note:
Replacement battery (Order No. 4027 0357,
Ç
4/12).
Digital pocket calipers with drive wheel
* With HM measuring faces.
DIN
862
INOX
RS232
∅ 1,6 mm
With rectangular depth gauge
With HM measuring faces.
Order
No.
Measure-
ment range
mm
4006
Design
Reading
Jaw
length
mm
0151
150
35.00
With round depth gauge
0.01 mm (0.0005 inch)
40
0150
150
30.00
With rectangular depth gauge 0.01 mm (0.0005 inch)
40
0152
150*
59.90
With rectangular depth gauge 0.01 mm (0.0005 inch)
40
0200
200
54.90
With rectangular depth gauge 0.01 mm (0.0005 inch)
50
0300
300
89.90
With rectangular depth gauge 0.01 mm (0.0005 inch)
60
(409)
Design:
Made of stainless steel, hardened, reading parts and vernier matt chrome-plated,
with rectangular depth gauge,
thread table on rear side.
Supplied in an artificial leather case.
Application:
For inside, outside, depth and step measurements within narrow measurement ranges.
Order
No.
Measurement range
mm
4004
Design
Reading below
mm
Jaw length
mm
0100
100
17.95
With locking screw
0.05
25
0105
100
18.60
With locking screw
0.02
25
(401)
Small pocket calipers
Design:
Made of stainless steel, hardened, reading parts matt chrome-plated, toothed rack
covered, measuring faces precision ground, with roller fine adjustment and locking screw
and
rectangular depth gauge.
Supplied in artificial leather case.
Application:
For inner, outer, depth and step measurements.
Dial calipers
m
DIN
862
INOX
Certificate
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
736