738 / 1562
4/10
Digital pocket calipers
ISO
13385-1
INOX IP 40
Absolute
function
Certificate
USB
Digimatic
∅ 1,6 mm
f
Protection class overview
First
Importance of protection
Digit
of operating equipment
0
Unprotected
1
Protection against penetration by solid foreign bodies
with a diameter larger than 50 mm
2
Protection against penetration by solid foreign bodies
with a diameter larger than 12.5 mm
3
Protection against penetration by solid foreign bodies
with a diameter larger than 2.5 mm
4
Protection against penetration by solid foreign bodies
with a diameter larger than 1 mm
5
Protected against dust
6
Dustproof
Example:
Measuring instrument with protection
IP 67:
(IP – Internati-
onal Protection). This is a dustproof measuring instrument which can
also be submerged for brief periods of time.
Second Water protection
Digit
0
Unprotected
1
Protection against vertical drips
2
Protection against dripping water with 15° incline
3
Protection against water spray
4
Protection against splashing
5
Protection against jets of water
6
Protection against strong jets of water
7
Protection against temporary submersion
8
Protection against prolonged submersion
O
Design:
Made of stainless steel, hardened, measuring faces precision
ground, with locking screw, digit height of LCD 7.5 mm, inductive
measurement system. Supplied with battery CR 2032, 3 V, in plastic
case.
Function:
On and automatic off switch, mm/inch switching, automatic
switching by means of slider movement, key lock set for zero position,
re-zeroing after switching deleted (absolute system), reset (zeroing)
possible at each position, ± pre-set function (setting a numerical value).
Application:
For inner, outer, depth and step measurements.
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Order
No.
Measurement range
mm
4023
Design
Reading
Jaw length
mm
1150
150
145.00
With round depth gauge
0.01 mm (0.0005 inch)
40
1151
150
145.00
With rectangular depth gauge
0.01 mm (0.0005 inch)
40
1200
200
205.00
With rectangular depth gauge
0.01 mm (0.0005 inch)
50
1300
300
259.00
Without depth gauge
0.01 mm (0.0005 inch)
65
(404)
Digital pocket calipers
Design:
Made of stainless steel, hardened, with drive wheel. Retrofitted
for wireless data transfer with transmitter module TLC TWIN as well as
receiver TWIN station. Range between instrument and receiver is 12 m.
Digit height of LCD 11 mm. Automatic saving mode after 10 minutes.
Switch-off after 2 hours. Upgradeable to interface port with USB or
Digimatic, protection remains with cable connection. Supplied with
battery CR 2032, 3 V, in plastic case.
Function:
On and automatic off switch, mm/inch switching, automatic
switching by means of slider movement, key lock set for zero position,
re-zeroing after switching deleted (absolute system), reset (zeroing)
possible at each position. Unique extension for data transmission with
TWIN connection (TLC) is possible.
Application:
For inside, outside, depth and step measurements.
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Cable TLC-USB (Order No. 4025 0015,
Ç
4/12).
Cable TLC-DIGIMATIC (Order No. 4025 0020,
Ç
4/12).
Transmitter module TLC-TWIN (Order No. 4025 0025,
Ç
4/12).
Receiver TWIN station available upon request.
Order
No.
Measurement range
mm
4021
Design
Reading
Jaw length
mm
2160
150
122.00
With round depth gauge
0.01 mm (0.0005 inch)
40
3200
200
153.00
With rectangular depth gauge
0.01 mm (0.0005 inch)
50
3300
300
236.00
With rectangular depth gauge
0.01 mm (0.0005 inch)
64
(495)
Digital pocket calipers TWIN-Cal
With round depth gauge
m
DIN
862
INOX
IP 67
Absolute
function
Certificate
∅ 1,5 mm
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
738