739 / 1562
4/11
Digital pocket calipers/accessories
INOX
ISO
13385-1
INOX IP 67
Absolute
function
Certificate
USB
Digimatic
∅ 1,6 mm
opto
RS232
USB
Digimatic
... 0002
... 0003
... 0004
Application:
For data transmission from digital measuring equipment
to PC or printer without complex interfaces.
Order
No.
Design
4025
Interface
Length
m
0002
Data cable SIMPLEX
79.20
Opto RS 232 2
0003
Data cable USB incl. software
75.30
USB
2
0004
Data cable Digimatic
67.70
Digimatic
2
(404)
Data cable
Design:
Made of stainless steel, hardened, with drive wheel. Retrofitted
for wireless data transfer with transmitter module TLC TWIN as well as
receiver TWIN station. Range between instrument and receiver is 12 m.
Digit height of LCD 11 mm. Automatic saving mode after 10 minutes.
Switch-off after 2 hours. Upgradeable to interface port with USB or
Digimatic, protection remains with cable connection. Supplied with
battery CR 2032, 3 V, in plastic case.
Function:
On and automatic off switch, mm/inch switching, automatic
switching by means of slider movement, key lock set for zero position,
re-zeroing after switching deleted (absolute system), reset (zeroing)
possible at each position. Unique extension for data transmission with
TWIN connection (TLC) is possible.
Application:
For inside, outside, depth and step measurements.
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Cable TLC-USB (Order No. 4025 0015,
Ç
4/12).
Cable TLC-DIGIMATIC (Order No. 4025 0020,
Ç
4/12).
Transmitter module TLC-TWIN (Order No. 4025 0025,
Ç
4/12).
Receiver TWIN station available upon request.
Order
No.
Measurement range
mm
4024
Design
Reading
Jaw length
mm
0011
150
159.00
With round depth gauge
0.01 mm (0.0005 inch)
40
0012
150
159.00
With rectangular depth gauge
0.01 mm (0.0005 inch)
40
1151
150*
159.00
With round depth gauge
0.01 mm (0.0005 inch)
40
1201
200*
222.00
With rectangular depth gauge
0.01 mm (0.0005 inch)
50
1301
300*
305.00
With rectangular depth gauge
0.01 mm (0.0005 inch)
64
(495)
Digital pocket calipers TWIN-Cal
* With drive wheel.
Tiefenmessbrücke
Design:
Made of stainless steel, with clamping screw.
Application:
For mounting onto pocket calipers. For measuring depths,
holes, grooves, sections etc.
Note:
Suitable for all pocket calipers up to measuring range 200 mm.
Order
No.
Dimensions
mm
4014
4024
0075
75 x 7
19.30
–
1001
75 x 6
–
33.00
(403)
(495)
D pth gauge bridge
Order
No.
Set contents
4028
0005
Pair of measuring inserts with disc,
disc ∅ 6, 10 and 12.5 mm
Pair of measuring inserts with 60° taper,
∅ 9 and 12.5 mm
Pair of measuring inserts with cylindrical
measuring faces 1.5 mm
Measuring insert base right and left
Hexagonal wrench
164.00
(404)
Design:
Accessories set made of steel, burnished black. For digital
caliper gauge with a beak length of 40 mm. Supplied in a wooden box.
Application:
For measuring hole distances, grooves and recesses.
Measuring tool set extensions
For measuring
hole distances
For measuring
notches
For measuring
distances
For measuring
hole distances
For measuring
notches
TD
Articles marked ◊ are not held in stock, procurement is effected at short notice.
4
Measuring
Equipment
Not all items are available in every country.
739