TPT November 2009

53 / 132

... Make contact with
more than
visitors!
77,000
Our team will be pleased to inform you of your entry options in the
official trade fair catalogue of wire/Tube 2010!
|
Contact:
Phone +49.201.36547-238
Fax +49.201.36547-225
Email:
Neureuter Fair Media
Office Essen
Westendstr. 1
45143 Essen / Germany
1 Maschinen zur Drahtherstellung und Veredelung
1.6.5 Schneiden
1.6.5 1 Maschinen zur Drahtherstellung und Veredelung
Produktkategorien
1.6.5 Schneiden
1.6.5
SMITH &
SONS
Exhibiting at wire/Tube Düsseldorf?
Book your catalogue entry now and save 5% (limited offer)!
10_84_1/3Anzeige_wiretube_RL.indd 1 20.05.2009 14:12:53 Uhr
Weld cleaning
power brush
THE weld cleaning power brush by Osborn
International, India, is designed especially
for the gas and oil pipeline construction
industry. It is an aggressive model that runs
at high speeds on surfaces for descaling,
deburring, removing rust and adhesive
residues as well as preparing and cleaning
weld seams.
With the most commonly used Osborn
brush of diameter 171mm and 76 knots,
almost 500,000 sharp wire tips per second are
applied to the weld seam. These move over
the surface at a speed more than 280km/h and
thus remove even the smallest contaminants.
These brushes are particularly designed
for: weld seam cleaning on fillet welds, in
constricted openings and slots; non-stock
removing; removal of the coating material,
which has been applied as corrosion
protection, from the exterior of the pipeline
tubes; and the problem zones and undercut
that arise under the influence of heat and are
normally difficult to reach during welding.
The removal of cinder and oxidisation
is achieved in a complete and efficient
manner. It is an excellent cleaning solution
for weld seams prior to re-welding. Any
welding defects are visible immediately after
brushing and can be reworked and an overall
improvement of quality is achieved.
Osborn International’s weld cleaning
power brush is produced from the highest
quality materials, thus providing long life
and exceptional brushing results. And
ultimately, Osborn claims, it can reduce
the cost of construction by 30-35%.
Depending upon the surface quality
required, brushes with the correct wire size
can be specified. These brushes are available
in normal and high density variations. They
are easy to install and operate with all mobile
as well as stationary machines.
Osborn Lippert India Private Limited –
India
Fax: +91 240 2552530
Email:
Website:
Read this magazine
online @: