Cisco IP 7960 Phone Help.fmb - page 20

3-5
Cisco IPPhone 7960 and 7940SeriesUser Guide
78-10182-07
Chapter 3 PlacingaCall andOtherBasicPhoneTasks
MakingTelephoneCalls
ParkingaCall
Park a call when youwant to store the call and then retrieve the call from another
phone in theCiscoCallManager system (for example, a phone in someone else’s
office or in a conference room). Call park numbers are pre-configured for this
purpose by your system administrator.
Follow these steps to park a call.
Procedure
Step 1
During an active call, press the
more
soft key until you see the
Park
tab.
Step 2
Press
Park
. The LCD screen displays the special call park number at which the
call is stored. If the screen does not display a call park number, the call park
feature is not available to you.
Step 3
Make a note of the call park number, then hang up. The call is parked at that
number, allowing you to retrieve it from another phone.
Step 4
To retrieve the parked call from any phone in theCiscoCallManager system, dial
the call park number at which the call is parked.
Note
You have a limited amount of time to retrieve the parked call before it
reverts to ringing at its original destination. See your system
administrator for this time limit.
UsingCallPickup
You can answer an incoming call that is ringing on a telephone extension other
than your own by using the call pickup feature.
There are two types of call pickup available on the Cisco IP Phone, as described
in these topics:
1...,10,11,12,13,14,15,16,17,18,19 21,22,23,24,25,26,27,28,29,30,...64
Powered by FlippingBook