Background Image
Table of Contents Table of Contents
Previous Page  36 / 96 Next Page
Information
Show Menu
Previous Page 36 / 96 Next Page
Page Background www.read-tpt.com

T E CHNOLOG Y

34

MARCH 2017

Automatic tool detection

in tube forming

WORKPIECES with special end form

geometry are in demand. Whether for

initial production or repeated precision,

ensuring exact parameters is necessary

for efficient implementation. transfluid

has developed a solution with automatic

tool detection for tube forming. The new

REB 645 axial tube forming machine

allows tube end forming with fast tool

changes for complex geometries and

extreme degrees of forming.

Using a barcode scanning system, the

operation data of a tube with individual

barcode can be easily read, eg for end

forming. For this purpose, all tools of

the machine, which is equipped with six

forming stations, have RFID sensors,

ensuring the right program and the

appropriate tools are available. If the

automatic inspection unit detects a

wrong tool, the operating panel with

data memory displays this information

immediately. The identification for

the correct tool for the change is also

indicated.

Using

the

convenient

quick-

connecting system of the transfluid

solution with fork for fixing and locking

bolt for securing the mount, the machine

operator can directly change the tool

and then precisely perform the tube end

forming.

The REB 645 allows the axial forming

of tubes with diameters from 6 to 45mm.

By means of a servomotor, the tool

sequence is positioned horizontally and

vertically. In addition, rolling stations

for specific forming processes can be

integrated. Upon request, the machine

can be equipped with electric or

hydraulic numeric drives. In the case of

extremely short cycle times, the forming

procedures can be carried out gradually

in transfer systems.

transfluid Maschinenbau GmbH

Germany

Fax: +49 2972 9715 11

Email:

sales@transfluid.de

Website:

www.transfluid.de

All tools of the REB 645 are equipped with

RFID sensors

The new REB 645 tube forming

machine with automatic tool detection

Prior to end forming, the operation

parameters are read via a barcode

Photo credit: © transfluid

Photo credit: © transfluid

Photo credit: © transfluid

Barnshaws extends structural exper tise

to aluminium louvres

ALUMINIUM louvres have become

a mainstay of modern architecture,

ensuring that excessive sunlight

does not adversely affect the interior

environment of a structure.

However, as architectural design

has become more freeform, increased

demand has been placed on louvres

to seamlessly integrate with these new

aesthetics.

As a result, increased intricacies have

seen the advent of bending aluminium

louvre profiles, a demanding process

that is familiar to Barnshaws Section

Benders.

Barnshaws claims to have the

largest specialist aluminium bending

machine currently in the UK. Its facility

can cater for one-off sections to orders

of thousands, enabled by an expert

aluminium engineering team and large

machine capacity.

To ensure that the internal profile

of the extruded section is consistent,

Barnshaws uses a specialist technique

that is a closely guarded company

secret, allowing consistent profiles to

be attained almost regardless of the

required radii. Offering short lead times

and adaptability to client requirements,

Barnshaws can ensure that any project

can benefit frommodern and specialised

solutions.

Established in 1969, Barnshaws

supplies market sectors such as

construction, power generation, mining,

transport and general manufacturing

with shaped beams, tubes, plate and

other profile section materials.

Barnshaw Section Benders Ltd

UK

Fax: +44 121 557 5323

Email:

info@barnshaws.com

Website:

www.barnshaws.com