THE UK OFFSHORE OIL AND GAS FABRICATORS DIRECTORY
2015
page 82
Capabilities and Capacities – Facility 1
Total Area (m²)
Not Provided
Fabrication Area Covered
(m²)
• Assembly hall – 2,340 m
2
(36 metres width x 65 metres length x
45 metres height) with main doors 32 metres width x 32 metres height
• Ability to treble the facility with an additional two halls onsite
Assembly and Erection
Area (m²)
• Assembly hall – 2,340 m
2
• Approximately 7,500 m
2
available externally, if required
Cranage – Lifting
Capacity and Hook
Height (Tonnes and
Metres)
Each assembly hall has three Gantry Cranes each complete with:
• 2 x 10 tonnes, hook height 33 metres
• 1 x 5 tonnes, hook height 33 metres
Load-Out Capacity
(Tonnes)
• 120 metres long, heavy lift quay with circa 4,000 tonnes plus
load-out capacity
• 33 kilonewtons/m
2
uniformly distributed load, 50 kilonewtons/m
2
bearing piles
• Transporter Bridge seaward with an air draught of 48.8 metres
(at mean high water springs (MWHS))
Minimum Water Depth
(Metres)
Eight metres above lowest astronomical tide (LAT)
Maximum Water Depth
(Metres)
13.5 metres (MHWS 5.5 metres)
Dry-Dock Capability
Not applicable
Other e.g. Licences,
Permissions, Warehouse
and Storage Size,
Engineering, Electrical
and Joiners Workshop
Size, etc.
Onsite facilities extend to:
• Factory space – 15,000 m
2
• Warehousing – 5,000 m
2
• Variable office accommodation
>
