8
With the Boxer you can easily make gemstone
boxes with perfect mitered joints
The mitered joints created by using the Boxer eliminate
unsightly seams where sides are glued together.Withmitered
joints the seams become inconspicuous. Using the Boxer to
hold a slab at an angle, ends can be quickly ground to an
accurate 45° bevel using a diamond lap. Four such slabs will
fit together to make the sides of a box up to 3" deep with no
limit on length.
The Boxer can be used with a 6" “No-Hole” lap on the right
side of a Genie or a standard 6" lap on the left side. The Pixie
will require a 4" “No-Hole” lap, and a smaller plastic pan,
whichyoumaypurchase fromthe supermarket. For use on the
Titan you will need to purchase the “Boxer to TitanAdaptor”
listed separately below, this will allow mounting on either
the right or left side of the Titan with a maximum 6" lap size.
We recommend a 100 grit lap. Sanding and polishing may
be done with Nova Discs or Magnetic laps. The Boxer is
made of a combination of stainless steel and aluminum parts.
THE BOXER
** IMPORTANT **
WEAR SAFETY GOGGLES WHEN USING THE BOXER
The Boxer mitered joint attachment
The Boxer to Titan Adaptor
These adaptors fit over the shafts of the Genie, Pixie, Big-
Foot and Xpert. The adaptors all have a 1" OD to fit our
Galaxy and Nova wheels. Order extra right hand adaptors
for specialty wheels for easy change out of wheels while
working. Both R/H adaptors have hole for accepting a
1
⁄
4
"x
20 bolt in pads. The L/H Genie adaptor comes with lap
connector nut.
101-ADP-GR ............R/H Genie........... 8 oz............71.50
101-ADP-GL ............L/H Genie........... 8 oz............82.50
101-ADP-PR. ............R/H Pixie............ 6 oz............38.50
501-ADP-BFR ..........R/H BigFoot....... 6 oz............49.50
501-ADP-XR ............R/H Xpert........... 8 oz............40.50
Now you can enjoy the convenience of an extra adaptor for
adding wheels to your Genie without having to figure out
in advancewhich spacers youmight need. This kit contains
the extra Genie right hand adaptor and nut, plus seven extra
spacers to accommodate anywheel combination. Contains
the following spacers: two 1
3
/
8
"
wide, three
3
/
4
"
wide, one
5
/
8
"
, wide, and one
1
/
4
"
wide.
101-ADP-GRK......................... 2 lbs. ...................... 99.75
GENIE WHEEL ADAPTOR KIT
THE BOXER
SHAFT ADAPTORS FOR GEM-MAKERS
SPACERS FOR GEM MAKERS
101-PSP-1............. Pixie Spacer.............. 1 oz.. .......... 5.00
101-GSP-
3
⁄
4
........... Genie Spacer............ 1 oz. ........... 5.50
101-GSP-1-
3
/
8
....... Genie Spacer............ 1 oz. ........... 6.50
101-TSP-1-
3
⁄
4
........ Titan Spacer.. ........... 5 oz. ......... 12.00
CUSTOM SPACERS (Fit Genie, Titan, Xpert)
101-GSP-1............ 1" wide spacer.......... 1 oz.. .......... 6.50
101-GSP-
5
⁄
8
...........
5
⁄
8
" wide spacer......... 1 oz. ........... 6.50
101-GSP-
1
⁄
2
...........
1
⁄
2
" wide spacer......... 1 oz.. .......... 6.50
101-GSP-
1
⁄
4
...........
1
⁄
4
" wide spacer......... 1 oz.. .......... 6.50
100-BOXER.............. Shp wt. 5 lbs.. ......................... 159.00
100-BOXER-TA.... Shp wt. 2
1
⁄
2
lbs.. ........................... 75.65