9
NEW
JEWELER'S BUFF KITS FOR GEM-MAKERS
You can buff and polish jewelry on your Titan
and Pixie as well as on the Genie.
We've put together all the necessary adaptors, spacers, buffs
and rouge you need to convert your Gem-Maker to a buffing
machine without a lot of expense.
Each kit contains 1 muslin buff, 1 flannel buff, 1 bar of
Tripoli, one bar of Red Jeweler's Rouge, and the spacers
needed for mounting. The Genie and Pixie kits also contain
a right hand adaptor for mounting on a shaft. Wheels are
mounted directly onto the Titan shaft. The Genie Kit has 6"
buffs, Titan 8" buffs, and the Pixie Kit has 4" buffs.
Contains: 1- 4" muslin buff, 1- 4"
flannel buff, 1 bar of Tripoli, 1 bar red
jeweler’s rouge, 1 R/H adaptor w/nut,
one spacer.
PIXIE BUFF KIT
Contains: 1- 6" muslin buff, 1- 6"
flannel buff, 1 bar of Tripoli, 1 bar red
jeweler’s rouge, 1 R/H adaptor w/nut,
6 spacers.
GENIE BUFF KIT
Contains: 1- 8" muslin buff, 1- 8"
flannel buff, 1 bar of Tripoli, 1bar red
jeweler’s rouge, 4 spacers. Buffs and
spacers fit directly on Titan shaft.
TITAN BUFF KIT
100-JBK-T............ 4 lbs........... 46.00
100-JBK-G........... 6 lbs......... 109.00
100-JBK-P............ 3 lbs............53.00
ADAPTOR FOR USING TAPERED
SPINDLE ON GEM-MAKERS
This adaptor allows you to use a
3
/
8
" R/H tapered spindle for
attaching buffs to the right hand of the Genie, Pixie, BigFoot
andTitan.You can then use buffs with standard pin hole cen-
ters onyourGem-Maker. (Seepage83 for buffs.)The adaptor
spins into the
1
⁄
4
-20 adaptor hole on the right hand side of the
machine toallowyou toattach thespindle. Fits taperedspindle
shown below.
101-ADP-3/8...................... 8 oz. .............................. 9.95
TAPERED SPINDLE FOR GEM-
MAKERS
Use with adaptor above to attach buffs with standard pin
hole centers to your Gem-Maker.
154-TSR4............ Shp. Wt. 6 oz. ............................. 15.00
ADAPTOR TAPERED SPINDLE
Shown on Genie: adaptor, tapered spindle
and buff.
BUFF KITS
*** For replacement buffs and rouge see page 82-83 ***
This versatile guide has variable rock placement and adjust-
able rollers which allows small slabs to be cut with a small
trim saw. Marked in
1
⁄
4
" increments.
This guide works on our Genie Trim SawAttachment, Wizard
Trim Saw, and the New Xpert Trim Saw Attachment .
We recommend Super T brand cyanoacrylate adhesive and
Super Solvent for use with this product. (Adhesive and
solvent not included - See catalog page 93 to purchase)
605-2013 Dop Style Slabbing Guide. .
Shp.Wt. 2 lbs. . ... 125.00
DOP STYLE SLABBING GUIDE