8 / 124
6
It wasn’t easy to squeeze most
of the capabilities of a Genie
into a machine the size of a
shoebox, but that’s BigFoot!
BigFoot isdesigned tobemoreconvenient insize
andweight with onlyminor compromises in it’s
capacity to cut stones, and NOCOMPROMISE
at all in quality.
You can grind and polish calibrated cabochons
up to52x38with ease, aswell as larger stones of
baroque shapes. You have plenty of room be-
tween thewheels formaking crosses and hearts.
With the trim saw attachment, BigFoot can trim
out your smaller slabs with ease. Takes only a
minute to remove the right hand wheel adap-
tor and spin on the adaptor with the saw blade.
And blade, adaptor, and saw table all fit into
compartmentsofBigFoot for convenient storage
and transport.
Only 12" wide by 11" deep by 6
1
⁄
4
"
high!
Stores even smaller at 12”x 6
1
⁄
4
"
x 6
1
⁄
4
"
.
Check out these BigFoot features:
✔
Uses six 2
3
⁄
8
" Galaxy and Nova Wheels
in our standard sequence. You can grind and
polish with ease using these diamond wheels
✔
Four wheels are mounted at once for wide
(1
1
⁄
8
") wheel spacing, with the rapid (no tools
required) wheel change feature found on
the Genie.
✔
Uses our standard Spra-Mist coolant sys-
tem providing plenty of water to the wheels.
✔
Special pans for using Nova Discs on right
side. 14,000 grit Nova disc now included.
Additional grits of Nova discs on page 18.
✔
Has a variable speed control on a quiet,
premium quality motor. You get plenty of
power for the job.
✔
A halogen lamp is standard equipment,
giving you plenty of light right on your
work area.
BIGFOOT GEM-MAKER Comes with two 2
3
⁄
8
"
x 1
1
⁄
8
"
Galaxy Wheels (80 and 220 grit), four 2
3
⁄
8
"
x 1
1
⁄
8
"
Nova Wheels (280, 600, 1200 and 3000 grit); two Nova
wheel adaptors, one 4" 14,000 grit Diamond Nova Disc,
halogen lamp, cab rest, full size Spra-Mist coolant system,
and variable speed motor using 115V current.
500-BF-100. .....................16 lbs........................ 1299.00
TRIM SAWATTACHMENT Comes with 4" x.014 x
5
⁄
8
"
diamond saw blade, blade adaptor and saw table.
500-BFS-105....................2 lbs............................ 130.00
NOVA WHEEL ADAPTOR for mounting extra
Nova Wheels.
501-ADP-BFR..................1 lb................................ 49.50
NOVA SPACERS Use these spacers when using extra
NovaWheel adaptor. Spacers are 1
1
⁄
8
" wide with 1"AH.
501-BFSP-1
1
⁄
8
". ................6 ozs................................ 5.75
BIGFOOT GEM-MAKER
Shown at left is the trim saw attachment in
place. The saw blade is bolted to the wheel
adaptor that is then screwed onto the wheel
shaft. The saw table fits neatly in the water pan.
TRIM SAW
ATTACHMENT