![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0050.jpg)
48 TC-14 SLAB/TRIM SAW
The Model TC-14 comes set up to use as a slab saw.
The removable table vise easily holds a 5" by 7" rock
for slabbing. Larger rocks can be cut depending on
their configuration and how they fit into the vise, blade
and saw box space.
The vise has over 3" cross feed adjustment, and moves
on strong, stainless steel glides. The power feed motor
is geared for continuous operation with a slip clutch
and safety shut off switch. Once the cut is made, it is
easy to pull the vise back to the starting position for
the next cut.
The TC-14 is also designed to be used as a trim saw.
Large slabs can be held in the vise for trimming off
edges or a series of slices. This saw can be converted
to a full trim saw by removing the vise system, discon-
necting the power feed and leveling the top of the table
on one side of the blade (use a piece of board to level)
The arbor is mounted on top of the deck so the center
of the blade is even with the deck top. This makes 90
degree corner trim cuts easy.
Hood is powder coated steel. Includes acrylic window
for viewing
MODEL TC-14 SAW comes complete with base,
tank, vise, power feed assembly,
1
⁄
2
HP 115V/60Hz
motor, guards and hood. (Blade not included.)
600-14-1000. .........Shp Wt. 246 lbs..........2750.00
EXPORT MODEL same as above but with 220V
50Hz motor.
600-14-1000X. ......Shp. Wt. 246 lbs.........2880.00
Saw must be crated for shipment.
CRATING FEE for either saw.
600-14C.................Crating fee....................175.00
MODEL TC-14 SLAB/TRIM SAW
•
Power feed motor is geared for continuous
operation.
•
Removable table vise holds a 5" x 7" rock.Will cut a
5
1
⁄
4
" depth over the vise.
•
Saw arbor housing is cast aluminum with
3
⁄
4
" stain-
less steel arbor shaft and two sealed ball bearings.
Saw table and tank are heavy gauge steel plate.
Measures 24"W x 39" L x 21" High.
•
Industrial powder coat finish on all appropriate parts.
•
Motor available in
1
⁄
2
HP 115V/60Hz or 220V/50Hz.
Check these features
NOTE:
Blade not included in saw price. Choice of
blade depends on your application. See pages 55-57
or call us for more information.
This saw must be used with oil as a coolant. We rec-
ommend Roc-Oil, for fast cutting without the usual
disadvantages of oil. (See page 58.) Requires approx.
2
1
⁄
2
gals. coolant.
The TC-14 is a convenient size
slab/trim saw that will serve the
needs of most rockhounds.
Above: Rock ready for slabbing
Below: Large slice ready to trim