44 WIZARD TRIM SAW
WIZARD-4G TRIM SAW
THE WIZARD-4G comes with a sample bottle of
Water Aid, angle block and safety goggles.
Shipping Weight 22 lbs.
500-WL-100..................115V Model. .............. 749.00
500-WL-100X...............230V Model. .............. 825.00
Our Wizard-4G Trim Saw has a
new look, improved features and
a lower price. Hard to beat that
combination. You can't buy a
better trim saw anywhere.
•
The Wizard-4G makes a full 6" cut—more
than some larger saws. Fairly large slabs can
be trimmed simply by turning them to cut from
opposite directions.
•
The Wizard-4G uses water as a coolant and
this benefit alone makes the Wizard-4G a plea-
sure to use. Water is cheap, non-toxic and easy to
clean up, unlike every other coolant you can use,
especially oils.
•
When it comes to cleanup, you can detach the pans
from the rest of the saw with the turn of a single
thumb screw. Take the pan and the saw table to the
sink for cleaning and leave the saw on the work
bench. No other saw of any size or description is
this easy to clean.
•
TheWizard-4G saw housing is stainless steel pow-
der coated for good looks and long life. The saw
pan and table are molded from sturdy ABS plastic
that's easy to clean and gives years of service.
•
The high torque motor has plenty of power
for trimming any hardness of rock. Motor has
Ground Fault Circuit Interrupter to protect against
electrical shock.
•
The unique angle block included with the trim saw
allows you to finish-trim the edges of your cabs at
a ten degree angle, giving you a head start towards
grinding the bezel of your cab.
THE WIZARD-4G 6
″
TRIM SAW
Shown at right is the Wizard-4G with the rip fence attach-
ment and blade, both sold separately. Choose your blade
from those on pages 56-57.
RIP FENCEATTACHMENT: Lets you cut uniform strips. Comes
with bracket for attaching to front of saw pan, and adjustable
guide bar. Can be used on either side of blade.. Stainless steel,
approximately 11" long.
NOTE: The Rip Fence only fits Wizards manufactured after April
2007. Not for older model saws.
500-WL-200..................Shp. Wt. 2 lb................................. 75.00
NOTE:Theblade isnot includedwith thesawso that you
can choose your own blade. Uses
5
⁄
8
"
or
1
/
2
"
arbor hole.
To order a blade, see page 56-57 and choose from a
number of blade types and thicknesses.
The Wizard-4G measures approximately 12" from
front to rear, and 13" from left to right.
IMPORTANT SAFETY NOTE
The Wizard-4G is a trim saw and not
designed for slabbing rock. Wear Safety
Goggles when using saw.