44 / 124
42 GRYPHON BAND SAW
GRYPHON DIAMOND
BAND SAW
Order #
Description
Shp.Wt. Price
GRYPHONMODEL C-40 DIAMOND BAND SAW comes with
1
⁄
3
HP 115Vmotor,
coolant system,
one Heavy Duty Fuser's Blade
Made in U.S.A. Limited one year
warranty by manufacturer.
725-70-9800
17 lbs. 424.00
726-70-9801
726-70-9807
726-70-9802
726-70-9805
BLACK DIAMOND BLADE –Twin pack. Two high quality diamond blades. Stan-
dard replacement blades. 37" x 020" wide x .020" x.140" deep, Standard diamonds..
HEAVY DUTY FUSER BLADE. Coarse grit diamonds make this blade suitable
for cutting rock slabs, fused glass, and similiar tough materials. 37" x 020" wide x
.020" x.280" deep, Super Power diamonds.
MAINTENANCE KIT. Contains upper and lower bands, and replaceable bushing
for lower wheel.
BLADE GUIDES. Pack of 4 replacement guides.
1 lb. 146.25
1 lb.
83.50
8 ozs.
7.00
8 ozs.
20.50
TRANSFORMER, For overseas use, converts 230 volt power to 115 volt power.
104-WIZ-8634
8 lbs.
80.00
The simple, rugged construction of the Gryphon
Band Saw assures years of service, without expensive
and frustrating maintenance. You have a 12" square
platform area. The coolant system requires only tap
water—add a few drops of our Water Aid (see page 20)
to extend blade life. The reservoir measures 10" x 9".
Motor is
1
⁄
3
HP direct drive at 2850 RPM.
You can make those “impossible” cuts in
rock slabs and even fusion glass with this
Gryphon C-40 Band Saw. It works like a
wood band saw to cut curves and other
intricate shapes in stone and glass. Simply
guide the work piece and the saw does the rest.
The diamond blade cuts fast and the improved
tension adjustment gives you increased control
over the cutting process.
•
The Gryphon Band Saw uses thin diamond blades
which remove less material than wire or ring saw blades,
and eliminates “double cutting” on projects such as
foiled lampshades. The band saw is also the quietest
saw available, and easily cuts the most intricate patterns
in glass and stone.
•
Our Lapidary version of the Gryphon C-40 comes with
one special Heavy Duty Fuser's Blade. This special
heavy duty blade is made with coarse diamonds for cut-
ting dense stone, fused glass and other tough materials.
•
Both the Heavy Duty Fuser’s blade and the Standard
Black Diamond blade are 37" in circumference and will
fit other band saws using this size blade.
•
You can cut material up to 3" thick, but you must cut
SLOWLY and CAREFULLY. One inch thick material
is the maximum practical thickness.
FOR EXPORT USE, a transformer is required. Use the
one listed in chart below.