715 / 2440
9-70 Edition 47
Material Handlers
Lifting Capacities
●
MH3024
(Grenoble Sourced)
Lift Capacities
All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (11,470 lb), heavy lift on.
Load point height
Load over front
Load over rear
Load over side
Load at maximum reach (sticknose/bucket pin)
Undercarriage
Boom
Stick
MH or Standard
22'4" MH
15'9" Straight Stick
Undercarriage configuration
15 ft
20 ft
25 ft
30 ft
35 ft
ft
40 ft
MH – stabilizers up – solid tires
*18,000 *18,000 17,000
14.86
MH – stabilizers down – solid tires
*18,000 *18,000 *18,000
Lower (std UC) – f. stabilizer & r. dozer up
*18,000 *18,000 16,400
Lower (std UC) – f. stabilizer & r. dozer down
*18,000 *18,000 *18,000
Lower (std UC) – f. dozer & r. stabilizer up
*18,000 *18,000 16,400
Lower (std UC) – f. dozer & r. stabilizer down
*18,000 *18,000 *18,000
Lower (std UC) – 2 sets stabilizersup
*18,000 *18,000 16,500
Lower (std UC) – 2 sets stabilizersdown
*18,000 *18,000 *18,000
35 ft
MH – stabilizers up – solid tires
14,500 14,500 11,000
10,900 10,900 8200
23.43
MH – stabilizers down – solid tires
*18,800 *18,800 *18,800
*13,800 *13,800 *13,800
Lower (std UC) – f. stabilizer & r. dozer up
14,400 13,600 10,600
10,800 10,200 7900
Lower (std UC) – f. stabilizer & r. dozer down
*18,800 *18,800 15,900
*13,800 *13,800 12,000
Lower (std UC) – f. dozer & r. stabilizer up
14,800 13,100 10,600
11,100 9800 7900
Lower (std UC) – f. dozer & r. stabilizer down
*18,800 *18,800 16,400
*13,800 *13,800 12,300
Lower (std UC) – 2 sets stabilizersup
14,700 13,500 10,700
11,000 10,100 8000
Lower (std UC) – 2 sets stabilizersdown
*18,800 *18,800 *18,800
*13,800 *13,800 *13,800
30 ft
MH – stabilizers up – solid tires
14,900 14,900 11,300 10,100 10,100 7600
7800 7800 5800
28.67
MH – stabilizers down – solid tires
*19,600 *19,600 *19,600 *16,800 *16,800 15,800
*12,300 *12,300 *12,300
Lower (std UC) – f. stabilizer & r. dozer up
14,700 13,900 10,900 9900 9400 7300
7600 7200 5500
Lower (std UC) – f. stabilizer & r. dozer down
*19,600 *19,600 16,300 *16,800 *16,800 11,000
*12,300 *12,300 8500
Lower (std UC) – f. dozer & r. stabilizer up
15,100 13,500 10,900 10,200 9100 7300
7900 7000 5500
Lower (std UC) – f. dozer & r. stabilizer down
*19,600 *19,600 16,700 *16,800 16,000 11,300
*12,300 *12,300 8700
Lower (std UC) – 2 sets stabilizersup
15,000 13,800 11,000 10,200 9400 7400
7800 7200 5600
Lower (std UC) – 2 sets stabilizersdown
*19,600 *19,600 *19,600 *16,800 16,400 13,400
*12,300 *12,300 10,400
25 ft
MH – stabilizers up – solid tires
14,800 14,800 11,300 10,100 10,100 7600 7300 7300 5400
6300 6300 4600
32.28
MH – stabilizers down – solid tires
*19,700 *19,700 *19,700 *16,700 *16,700 15,800 14,200 14,200 11,500
*11,600 *11,600 10,000
Lower (std UC) – f. stabilizer & r. dozer up
14,600 13,800 10,800 9900 9400 7300 7100 6700 5100
6100 5800 4300
Lower (std UC) – f. stabilizer & r. dozer down
*19,700 *19,700 16,200 *16,700 *16,700 11,100 13,500 13,200 8000
*11,600 11,500 6900
Lower (std UC) – f. dozer & r. stabilizer up
15,000 13,400 10,800 10,300 9100 7300 7400 6500 5100
6300 5600 4300
Lower (std UC) – f. dozer & r. stabilizer down
*19,700 *19,700 16,600 *16,700 16,000 11,300 *14,400 11,600 8200
*11,600 10,100 7100
Lower (std UC) – 2 sets stabilizersup
15,000 13,700 10,900 10,200 9400 7400 7300 6700 5200
6300 5800 4400
Lower (std UC) – 2 sets stabilizersdown
*19,700 *19,700 19,700 *16,700 16,500 13,400 13,800 11,900 9700
*11,600 10,400 8400
20 ft
MH – stabilizers up – solid tires
14,400 14,400 10,900 9900 9900 7500 7200 7200 5300
5400 5400 3900
34.78
MH – stabilizers down – solid tires
*20,400 *20,400 *20,400 *17,000 *17,000 15,600 14,100 14,100 11,400
10,900 10,900 8800
Lower (std UC) – f. stabilizer & r. dozer up
14,200 13,400 10,500 9700 9200 7100 7000 6700 5100
5300 5000 3600
Lower (std UC) – f. stabilizer & r. dozer down
*20,400 *20,400 15,800 *17,000 *17,000 10,900 13,400 13,100 7900
10,300 10,100 6000
Lower (std UC) – f. dozer & r. stabilizer up
14,600 13,000 10,500 10,100 8900 7100 7300 6400 5100
5500 4800 3600
Lower (std UC) – f. dozer & r. stabilizer down
*20,400 *20,400 16,200 *17,000 15,800 11,100 *14,500 11,500 8100
*11,300 8900 6100
Lower (std UC) – 2 sets stabilizersup
14,600 13,400 10,600 10,000 9200 7200 7200 6600 5100
5400 5000 3700
Lower (std UC) – 2 sets stabilizersdown
*20,400 *20,400 19,200 *17,000 16,200 13,200 13,700 11,900 9600
10,600 9100 7300
15 ft
MH – stabilizers up – solid tires
22,000 22,000 16,300 13,700 13,700 10,300 9600 9600 7100 7000 7000 5100 5300 5300 3800 4900 4900 3400
36.42
MH – stabilizers down – solid tires
*27,800 *27,800 *27,800 *21,500 *21,500 *21,500 *17,500 *17,500 15,200 13,900 13,900 11,200 10,700 10,700 8600 10,000 10,000 8100
Lower (std UC) – f. stabilizer & r. dozer up
21,900 20,400 15,700 13,500 12,800 9800 9400 8900 6800 6800 6500 4900 5100 4900 3600 4700 4500 3200
Lower (std UC) – f. stabilizer & r. dozer down
*27,800 *27,800 24,400 *21,500 *21,500 15,100 *17,500 *17,500 10,500 13,200 12,900 7700 10,100 9900 5800 9400 9300 5400
Lower (std UC) – f. dozer & r. stabilizer up
22,500 19,800 15,700 14,000 12,400 9800 9700 8600 6800 7100 6200 4900 5400 4700 3600 4900 4300 3200
Lower (std UC) – f. dozer & r. stabilizer down
*27,800 *27,800 25,300 *21,500 *21,500 15,500 *17,500 15,400 10,700 *14,500 11,300 7900 11,300 8700 6000 10,600 8100 5600
Lower (std UC) – 2 sets stabilizersup
22,400 20,300 15,800 13,900 12,700 10,000 9600 8800 6900 7100 6500 4900 5300 4800 3600 4900 4500 3300
Lower (std UC) – 2 sets stabilizersdown
*27,800 *27,800 *27,800 *21,500 *21,500 18,500 *17,500 15,800 12,800 13,500 11,700 9400 10,400 9000 7200 9700 8400 6700
*Limited by hydraulic rather than tipping load.
(continued on next page)
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.