711 / 2440
9-66 Edition 47
Material Handlers
Lifting Capacities
●
MH3024
(Grenoble Sourced)
Lift Capacities
All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (9040 lb), heavy lift on.
Load point height
Load over front
Load over rear
Load over side
Load at maximum reach (sticknose/bucket pin)
Undercarriage
Boom
Stick
MH or Standard
22'4" MH
15'9" Straight Stick
Undercarriage configuration
15 ft
20 ft
25 ft
30 ft
35 ft
ft
40 ft
MH – stabilizers up – solid tires
*18,000 *18,000 15,100
14.86
MH – stabilizers down – solid tires
*18,000 *18,000 *18,000
Lower (std UC) – f. stabilizer & r. dozer up
*18,000 *18,000 14,500
Lower (std UC) – f. stabilizer & r. dozer down
*18,000 *18,000 *18,000
Lower (std UC) – f. dozer & r. stabilizer up
*18,000 *18,000 14,500
Lower (std UC) – f. dozer & r. stabilizer down
*18,000 *18,000 *18,000
Lower (std UC) – 2 sets stabilizersup
*18,000 *18,000 14,700
Lower (std UC) – 2 sets stabilizersdown
*18,000 *18,000 *18,000
35 ft
MH – stabilizers up – solid tires
13,100 13,100 9800
9700 9700 7200
23.43
MH – stabilizers down – solid tires
*18,800 *18,800 *18,800
*13,800 *13,800 *13,800
Lower (std UC) – f. stabilizer & r. dozer up
12,800 12,100 9300
9500 9000 6800
Lower (std UC) – f. stabilizer & r. dozer down
*18,800 *18,800 14,300
*13,800 *13,800 10,700
Lower (std UC) – f. dozer & r. stabilizer up
13,200 11,700 9300
9800 8700 6800
Lower (std UC) – f. dozer & r. stabilizer down
*18,800 *18,800 14,700
*13,800 *13,800 11,000
Lower (std UC) – 2 sets stabilizersup
13,200 12,100 9400
9800 9000 6900
Lower (std UC) – 2 sets stabilizersdown
*18,800 *18,800 17,600
*13,800 *13,800 13,100
30 ft
MH – stabilizers up – solid tires
13,400 13,400 10,100 9000 9000 6600
6800 6800 4900
28.67
MH – stabilizers down – solid tires
*19,600 *19,600 *19,600 *16,800 *16,800 14,300
*12,300 *12,300 11,100
Lower (std UC) – f. stabilizer & r. dozer up
13,100 12,400 9600 8800 8300 6300
6600 6300 4700
Lower (std UC) – f. stabilizer & r. dozer down
*19,600 *19,600 14,700 *16,800 16,600 9800
*12,300 *12,300 7500
Lower (std UC) – f. dozer & r. stabilizer up
13,600 12,000 9600 9100 8000 6300
6900 6000 4700
Lower (std UC) – f. dozer & r. stabilizer down
*19,600 *19,600 15,100 *16,800 14,500 10,100
*12,300 11,200 7700
Lower (std UC) – 2 sets stabilizersup
13,500 12,400 9700 9000 8300 6400
6800 6300 4700
Lower (std UC) – 2 sets stabilizersdown
*19,600 *19,600 17,900 *16,800 14,900 12,000
*12,300 11,500 9300
25 ft
MH – stabilizers up – solid tires
13,300 13,300 10,000 9000 9000 6700 6400 6400 4600
5500 5500 3800
32.28
MH – stabilizers down – solid tires
*19,700 *19,700 *19,700 *16,700 *16,700 14,400 12,900 12,900 10,400
11,300 11,300 9000
Lower (std UC) – f. stabilizer & r. dozer up
13,100 12,400 9600 8800 8300 6300 6200 5900 4300
5300 5000 3600
Lower (std UC) – f. stabilizer & r. dozer down
*19,700 *19,700 14,600 *16,700 16,600 9900 12,200 11,900 7000
10,600 10,400 6000
Lower (std UC) – f. dozer & r. stabilizer up
13,500 12,000 9600 9100 8000 6300 6400 5600 4300
5500 4800 3600
Lower (std UC) – f. dozer & r. stabilizer down
*19,700 *19,700 15,000 *16,700 14,500 10,100 13,700 10,400 7200
*11,600 9100 6200
Lower (std UC) – 2 sets stabilizersup
13,400 12,300 9700 9000 8300 6400 6400 5800 4400
5400 5000 3600
Lower (std UC) – 2 sets stabilizersdown
*19,700 *19,700 17,800 *16,700 14,900 12,000 12,500 10,800 8600
10,900 9400 7500
20 ft
MH – stabilizers up – solid tires
12,900 12,900 9600 8800 8800 6500 6300 6300 4500
4700 4700 3200
34.78
MH – stabilizers down – solid tires
*20,400 *20,400 *20,400 *17,000 *17,000 14,100 12,800 12,800 10,300
9800 9800 7800
Lower (std UC) – f. stabilizer & r. dozer up
12,700 12,000 9200 8600 8100 6200 6100 5800 4300
4500 4200 3000
Lower (std UC) – f. stabilizer & r. dozer down
*20,400 *20,400 14,200 16,700 16,400 9700 12,100 11,900 6900
9200 9100 5200
Lower (std UC) – f. dozer & r. stabilizer up
13,100 11,600 9200 8900 7800 6200 6400 5600 4300
4700 4000 3000
Lower (std UC) – f. dozer & r. stabilizer down
*20,400 *20,400 14,600 *17,000 14,300 9900 13,600 10,400 7100
10,400 7900 5300
Lower (std UC) – 2 sets stabilizersup
13,000 11,900 9300 8800 8100 6200 6300 5800 4300
4600 4200 3000
Lower (std UC) – 2 sets stabilizersdown
*20,400 *20,400 17,400 *17,000 14,700 11,800 12,400 10,700 8600
9500 8100 6500
15 ft
MH – stabilizers up – solid tires
19,800 19,800 14,400 12,200 12,200 9000 8400 8400 6100 6100 6100 4300 4600 4600 3100 4200 4200 2800
36.42
MH – stabilizers down – solid tires
*27,800 *27,800 *27,800 *21,500 *21,500 20,100 17,200 17,200 13,700 12,600 12,600 10,100 9700 9700 7700 9000 9000 7200
Lower (std UC) – f. stabilizer & r. dozer up
19,600 18,300 13,800 12,000 11,300 8600 8200 7800 5800 5900 5600 4100 4400 4100 2900 4000 3800 2600
Lower (std UC) – f. stabilizer & r. dozer down
*27,800 *27,800 22,000 *21,500 *21,500 13,500 16,300 15,900 9300 11,900 11,700 6700 9000 8900 5000 8400 8300 4600
Lower (std UC) – f. dozer & r. stabilizer up
20,200 17,700 13,800 12,400 10,900 8600 8500 7500 5800 6200 5400 4100 4600 3900 2900 4200 3600 2600
Lower (std UC) – f. dozer & r. stabilizer down
*27,800 *27,800 22,800 *21,500 20,500 13,900 *17,500 13,900 9500 13,400 10,200 6900 10,200 7700 5200 9500 7200 4800
Lower (std UC) – 2 sets stabilizersup
20,100 18,200 14,000 12,300 11,300 8700 8500 7700 5900 6100 5600 4100 4500 4100 2900 4200 3800 2600
Lower (std UC) – 2 sets stabilizersdown
*27,800 *27,800 27,800 *21,500 21,000 16,700 16,700 14,300 11,400 12,200 10,500 8400 9300 8000 6300 8700 7400 5900
*Limited by hydraulic rather than tipping load.
(continued on next page)
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.