Caterpillar Performance Handbook, January 2017, SEBD0351-47

708 / 2440

Edition 47 9-63
Material Handlers
9
Lifting Capacities
● MH3024
(Grenoble Sourced)
Lift Capacities
All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (11,470 lb), heavy lift on.
Load point height Load over front Load over rear Load over side Load at maximum reach (sticknose/bucket pin)
Undercarriage Boom Stick
MH or Standard VA 9'6"
Undercarriage configuration
10 ft 15 ft 20 ft 25 ft
ft
30 ft
MH – stabilizers up – solid tires *9500 *9500 *9500
13.94
MH – stabilizers down – solid tires *9500 *9500 *9500
Lower (std UC) – f. stabilizer & r. dozer up *9500 *9500 *9500
Lower (std UC) – f. stabilizer & r. dozer down *9500 *9500 *9500
Lower (std UC) – f. dozer & r. stabilizer up *9500 *9500 *9500
Lower (std UC) – f. dozer & r. stabilizer down *9500 *9500 *9500
Lower (std UC) – 2 sets stabilizersup *9500 *9500 *9500
Lower (std UC) – 2 sets stabilizersdown *9500 *9500 *9500
25 ft
MH – stabilizers up – solid tires *9800 *9800 *9800 *7000 *7000 *7000
20.67
MH – stabilizers down – solid tires *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – f. stabilizer & r. dozer up *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – f. stabilizer & r. dozer down *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – f. dozer & r. stabilizer up *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – f. dozer & r. stabilizer down *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – 2 sets stabilizersup *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – 2 sets stabilizersdown *9800 *9800 *9800 *7000 *7000 *7000
20 ft
MH – stabilizers up – solid tires *13,800 *13,800 11,000 *6100 *6100 *6100
24.54
MH – stabilizers down – solid tires *13,800 *13,800 *13,800 *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer up *13,800 13,500 10,600 *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer down *13,800 *13,800 *13,800 *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer up *13,800 13,100 10,600 *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer down *13,800 *13,800 *13,800 *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersup *13,800 13,400 10,700 *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersdown *13,800 *13,800 *13,800 *6100 *6100 *6100
15 ft
MH – stabilizers up – solid tires *17,000 *17,000 16,500 14,100 14,100 10,600 9900 9900 7400 *5800 *5800 *5800
26.90
MH – stabilizers down – solid tires *17,000 *17,000 *17,000 *14,800 *14,800 *14,800 *12,200 *12,200 *12,200 *5800 *5800 *5800
Lower (std UC) – f. stabilizer & r. dozer up *17,000 *17,000 15,900 13,900 13,100 10,200 9700 9200 7100 *5800 *5800 *5800
Lower (std UC) – f. stabilizer & r. dozer down *17,000 *17,000 *17,000 *14,800 *14,800 *14,800 *12,200 *12,200 10,800 *5800 *5800 *5800
Lower (std UC) – f. dozer & r. stabilizer up *17,000 *17,000 15,900 14,400 12,700 10,200 10,000 8900 7100 *5800 *5800 *5800
Lower (std UC) – f. dozer & r. stabilizer down *17,000 *17,000 *17,000 *14,800 *14,800 *14,800 *12,200 *12,200 11,100 *5800 *5800 *5800
Lower (std UC) – 2 sets stabilizersup *17,000 *17,000 16,100 14,300 13,100 10,300 10,000 9200 7200 *5800 *5800 *5800
Lower (std UC) – 2 sets stabilizersdown *17,000 *17,000 *17,000 *14,800 *14,800 *14,800 *12,200 *12,200 *12,200 *5800 *5800 *5800
10 ft
MH – stabilizers up – solid tires 20,800 20,800 15,200 13,500 13,500 10,100 9700 9700 7200 *5700 *5700 *5700
28.15
MH – stabilizers down – solid tires *21,500 *21,500 *21,500 *15,800 *15,800 *15,800 *12,600 *12,600 *12,600 *5700 *5700 *5700
Lower (std UC) – f. stabilizer & r. dozer up 20,700 19,300 14,600 13,300 12,600 9700 9500 9000 6900 *5700 *5700 5600
Lower (std UC) – f. stabilizer & r. dozer down *21,500 *21,500 *21,500 *15,800 *15,800 14,900 *12,600 *12,600 10,600 *5700 *5700 *5700
Lower (std UC) – f. dozer & r. stabilizer up 21,400 18,700 14,600 13,800 12,200 9700 9800 8700 6900 *5700 *5700 5600
Lower (std UC) – f. dozer & r. stabilizer down *21,500 *21,500 *21,500 *15,800 *15,800 15,300 *12,600 *12,600 10,900 *5700 *5700 *5700
Lower (std UC) – 2 sets stabilizersup 21,200 19,200 14,800 13,700 12,500 9800 9700 8900 6900 *5700 *5700 5700
Lower (std UC) – 2 sets stabilizersdown *21,500 *21,500 *21,500 *15,800 *15,800 *15,800 *12,600 *12,600 *12,600 *5700 *5700 *5700
5 ft
MH – stabilizers up – solid tires 19,500 19,500 14,000 12,900 12,900 9500 9400 9400 6900 *5900 *5900 5700
28.44
MH – stabilizers down – solid tires *24,700 *24,700 *24,700 *17,200 *17,200 *17,200 *13,200 *13,200 *13,200 *5900 *5900 *5900
Lower (std UC) – f. stabilizer & r. dozer up 19,400 17,900 13,400 12,700 11,900 9100 9200 8700 6600 *5900 *5900 5400
Lower (std UC) – f. stabilizer & r. dozer down *24,700 *24,700 21,900 *17,200 *17,200 14,300 *13,200 *13,200 10,300 *5900 *5900 *5900
Lower (std UC) – f. dozer & r. stabilizer up 20,000 17,300 13,400 13,100 11,500 9100 9500 8400 6600 *5900 *5900 5400
Lower (std UC) – f. dozer & r. stabilizer down *24,700 *24,700 22,600 *17,200 *17,200 14,700 *13,200 *13,200 10,600 *5900 *5900 *5900
Lower (std UC) – 2 sets stabilizersup 19,900 17,900 13,600 13,000 11,900 9200 9400 8600 6700 *5900 *5900 5500
Lower (std UC) – 2 sets stabilizersdown *24,700 *24,700 *24,700 *17,200 *17,200 *17,200 *13,200 *13,200 12,600 *5900 *5900 *5900
0 ft
MH – stabilizers up – solid tires 18,800 18,800 13,300 12,500 12,500 9100 9100 9100 6700 *6300 *6300 5800
27.79
MH – stabilizers down – solid tires *25,400 *25,400 *25,400 *18,400 *18,400 *18,400 *14,000 *14,000 *14,000 *6300 *6300 *6300
Lower (std UC) – f. stabilizer & r. dozer up 18,600 17,200 12,700 12,200 11,500 8700 8900 8500 6400 *6300 *6300 5500
Lower (std UC) – f. stabilizer & r. dozer down *25,400 *25,400 21,100 *18,400 *18,400 13,800 *14,000 *14,000 10,000 *6300 *6300 *6300
Lower (std UC) – f. dozer & r. stabilizer up 19,200 16,600 12,700 12,700 11,100 8700 9300 8100 6400 *6300 *6300 5500
Lower (std UC) – f. dozer & r. stabilizer down *25,400 *25,400 21,800 *18,400 *18,400 14,200 *14,000 *14,000 10,300 *6300 *6300 *6300
Lower (std UC) – 2 sets stabilizersup 19,100 17,100 12,900 12,600 11,500 8800 9200 8400 6500 *6300 *6300 5600
Lower (std UC) – 2 sets stabilizersdown *25,400 *25,400 *25,400 *18,400 *18,400 17,100 *14,000 *14,000 12,300 *6300 *6300 *6300
–5 ft
MH – stabilizers up – solid tires *21,500 *21,500 *21,500 18,500 18,500 13,100 12,300 12,300 8900 9100 9100 6600 *7200 *7200 6300
26.15
MH – stabilizers down – solid tires *21,500 *21,500 *21,500 *23,700 *23,700 *23,700 *17,500 *17,500 *17,500 *12,800 *12,800 *12,800 *7200 *7200 *7200
Lower (std UC) – f. stabilizer & r. dozer up *21,500 *21,500 *21,500 18,400 17,000 12,500 12,100 11,300 8500 8900 8400 6300 *7200 *7200 6000
Lower (std UC) – f. stabilizer & r. dozer down *21,500 *21,500 *21,500 *23,700 *23,700 20,800 *17,500 *17,500 13,600 *12,800 *12,800 10,000 *7200 *7200 *7200
Lower (std UC) – f. dozer & r. stabilizer up *21,500 *21,500 *21,500 19,000 16,400 12,500 12,500 10,900 8500 9200 8100 6300 *7200 *7200 6000
Lower (std UC) – f. dozer & r. stabilizer down *21,500 *21,500 *21,500 *23,700 *23,700 21,600 *17,500 *17,500 14,000 *12,800 *12,800 10,200 *7200 *7200 *7200
Lower (std UC) – 2 sets stabilizersup *21,500 *21,500 *21,500 18,900 16,900 12,700 12,400 11,300 8600 9100 8300 6400 *7200 *7200 6100
Lower (std UC) – 2 sets stabilizersdown *21,500 *21,500 *21,500 *23,700 *23,700 *23,700 *17,500 *17,500 16,900 *12,800 *12,800 12,200 *7200 *7200 *7200
–10 ft
MH – stabilizers up – solid tires 18,700 18,700 13,300 12,400 12,400 9000
MH – stabilizers down – solid tires *19,700 *19,700 *19,700 *14,400 *14,400 *14,400
Lower (std UC) – f. stabilizer & r. dozer up 18,500 17,100 12,700 12,100 11,400 8600
Lower (std UC) – f. stabilizer & r. dozer down *19,700 *19,700 *19,700 *14,400 *14,400 13,700
Lower (std UC) – f. dozer & r. stabilizer up 19,100 16,600 12,700 12,600 11,000 8600
Lower (std UC) – f. dozer & r. stabilizer down *19,700 *19,700 *19,700 *14,400 *14,400 14,100
Lower (std UC) – 2 sets stabilizersup 19,000 17,100 12,800 12,500 11,300 8700
Lower (std UC) – 2 sets stabilizersdown *19,700 *19,700 *19,700 *14,400 *14,400 *14,400
*Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or
quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.