Caterpillar Performance Handbook, January 2017, SEBD0351-47

706 / 2440

Edition 47 9-61
Material Handlers
9
Lifting Capacities
● MH3024
(Grenoble Sourced)
Lift Capacities
All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (9040 lb), heavy lift on.
Load point height Load over front Load over rear Load over side Load at maximum reach (sticknose/bucket pin)
Undercarriage Boom Stick
MH or Standard VA 9'6"
Undercarriage configuration
10 ft 15 ft 20 ft 25 ft
ft
30 ft
MH – stabilizers up – solid tires *9500 *9500 *9500
13.94
MH – stabilizers down – solid tires *9500 *9500 *9500
Lower (std UC) – f. stabilizer & r. dozer up *9500 *9500 *9500
Lower (std UC) – f. stabilizer & r. dozer down *9500 *9500 *9500
Lower (std UC) – f. dozer & r. stabilizer up *9500 *9500 *9500
Lower (std UC) – f. dozer & r. stabilizer down *9500 *9500 *9500
Lower (std UC) – 2 sets stabilizersup *9500 *9500 *9500
Lower (std UC) – 2 sets stabilizersdown *9500 *9500 *9500
25 ft
MH – stabilizers up – solid tires *9800 *9800 9600 *7000 *7000 *7000
20.67
MH – stabilizers down – solid tires *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – f. stabilizer & r. dozer up *9800 *9800 9200 *7000 *7000 *7000
Lower (std UC) – f. stabilizer & r. dozer down *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – f. dozer & r. stabilizer up *9800 *9800 9200 *7000 *7000 *7000
Lower (std UC) – f. dozer & r. stabilizer down *9800 *9800 *9800 *7000 *7000 *7000
Lower (std UC) – 2 sets stabilizersup *9800 *9800 9300 *7000 *7000 *7000
Lower (std UC) – 2 sets stabilizersdown *9800 *9800 *9800 *7000 *7000 *7000
20 ft
MH – stabilizers up – solid tires 13,000 13,000 9700 *6100 *6100 *6100
24.54
MH – stabilizers down – solid tires *13,800 *13,800 *13,800 *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer up 12,800 12,100 9300 *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer down *13,800 *13,800 *13,800 *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer up 13,200 11,700 9300 *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer down *13,800 *13,800 *13,800 *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersup 13,100 12,000 9400 *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersdown *13,800 *13,800 *13,800 *6100 *6100 *6100
15 ft
MH – stabilizers up – solid tires *17,000 *17,000 14,700 12,600 12,600 9400 8800 8800 6400 *5800 *5800 5600
26.90
MH – stabilizers down – solid tires *17,000 *17,000 *17,000 *14,800 *14,800 *14,800 *12,200 *12,200 *12,200 *5800 *5800 *5800
Lower (std UC) – f. stabilizer & r. dozer up *17,000 *17,000 14,100 12,400 11,700 8900 8500 8100 6100 *5800 *5800 5300
Lower (std UC) – f. stabilizer & r. dozer down *17,000 *17,000 *17,000 *14,800 *14,800 13,900 *12,200 *12,200 9600 *5800 *5800 *5800
Lower (std UC) – f. dozer & r. stabilizer up *17,000 *17,000 14,100 12,800 11,300 8900 8900 7800 6100 *5800 *5800 5300
Lower (std UC) – f. dozer & r. stabilizer down *17,000 *17,000 *17,000 *14,800 *14,800 14,300 *12,200 *12,200 9900 *5800 *5800 *5800
Lower (std UC) – 2 sets stabilizersup *17,000 *17,000 14,200 12,700 11,700 9000 8800 8100 6200 *5800 *5800 5400
Lower (std UC) – 2 sets stabilizersdown *17,000 *17,000 *17,000 *14,800 *14,800 *14,800 *12,200 *12,200 11,800 *5800 *5800 *5800
10 ft
MH – stabilizers up – solid tires 18,700 18,700 13,400 12,000 12,000 8800 8500 8500 6200 *5700 *5700 5000
28.15
MH – stabilizers down – solid tires *21,500 *21,500 *21,500 *15,800 *15,800 *15,800 *12,600 *12,600 *12,600 *5700 *5700 *5700
Lower (std UC) – f. stabilizer & r. dozer up 18,400 17,200 12,800 11,800 11,100 8400 8300 7900 5900 *5700 *5700 4800
Lower (std UC) – f. stabilizer & r. dozer down *21,500 *21,500 20,900 *15,800 *15,800 13,300 *12,600 *12,600 9400 *5700 *5700 *5700
Lower (std UC) – f. dozer & r. stabilizer up 19,100 16,600 12,800 12,200 10,700 8400 8600 7600 5900 *5700 *5700 4800
Lower (std UC) – f. dozer & r. stabilizer down *21,500 *21,500 *21,500 *15,800 *15,800 13,700 *12,600 *12,600 9600 *5700 *5700 *5700
Lower (std UC) – 2 sets stabilizersup 19,000 17,100 12,900 12,100 11,100 8500 8600 7800 6000 *5700 *5700 4800
Lower (std UC) – 2 sets stabilizersdown *21,500 *21,500 *21,500 *15,800 *15,800 *15,800 *12,600 *12,600 11,500 *5700 *5700 *5700
5 ft
MH – stabilizers up – solid tires 17,300 17,300 12,200 11,400 11,400 8200 8200 8200 5900 *5900 *5900 4800
28.44
MH – stabilizers down – solid tires *24,700 *24,700 *24,700 *17,200 *17,200 *17,200 *13,200 *13,200 *13,200 *5900 *5900 *5900
Lower (std UC) – f. stabilizer & r. dozer up 17,100 15,800 11,600 11,200 10,500 7800 8000 7600 5600 *5900 *5900 4600
Lower (std UC) – f. stabilizer & r. dozer down *24,700 *24,700 19,500 *17,200 *17,200 12,700 *13,200 *13,200 9100 *5900 *5900 *5900
Lower (std UC) – f. dozer & r. stabilizer up 17,700 15,200 11,600 11,600 10,100 7800 8300 7300 5600 *5900 *5900 4600
Lower (std UC) – f. dozer & r. stabilizer down *24,700 *24,700 20,200 *17,200 *17,200 13,000 *13,200 *13,200 9300 *5900 *5900 *5900
Lower (std UC) – 2 sets stabilizersup 17,600 15,800 11,700 11,500 10,500 7900 8300 7500 5700 *5900 *5900 4600
Lower (std UC) – 2 sets stabilizersdown *24,700 *24,700 *24,700 *17,200 *17,200 15,800 *13,200 *13,200 11,200 *5900 *5900 *5900
0 ft
MH – stabilizers up – solid tires 16,600 16,600 11,500 11,000 11,000 7800 8000 8000 5700 *6300 *6300 4900
27.79
MH – stabilizers down – solid tires *25,400 *25,400 *25,400 *18,400 *18,400 *18,400 *14,000 *14,000 13,300 *6300 *6300 *6300
Lower (std UC) – f. stabilizer & r. dozer up 16,300 15,100 10,900 10,700 10,100 7400 7800 7400 5400 *6300 *6300 4600
Lower (std UC) – f. stabilizer & r. dozer down *25,400 *25,400 18,700 *18,400 *18,400 12,200 *14,000 *14,000 8800 *6300 *6300 *6300
Lower (std UC) – f. dozer & r. stabilizer up 16,900 14,500 10,900 11,100 9700 7400 8100 7100 5400 *6300 6100 4600
Lower (std UC) – f. dozer & r. stabilizer down *25,400 *25,400 19,400 *18,400 *18,400 12,600 *14,000 13,400 9100 *6300 *6300 *6300
Lower (std UC) – 2 sets stabilizersup 16,800 15,000 11,000 11,100 10,000 7500 8000 7300 5500 *6300 6300 4700
Lower (std UC) – 2 sets stabilizersdown *25,400 *25,400 24,100 *18,400 *18,400 15,300 *14,000 13,800 11,000 *6300 *6300 *6300
–5 ft
MH – stabilizers up – solid tires *21,500 *21,500 20,900 16,300 16,300 11,300 10,800 10,800 7600 8000 8000 5700 *7200 *7200 5400
26.15
MH – stabilizers down – solid tires *21,500 *21,500 *21,500 *23,700 *23,700 *23,700 *17,500 *17,500 *17,500 *12,800 *12,800 *12,800 *7200 *7200 *7200
Lower (std UC) – f. stabilizer & r. dozer up *21,500 *21,500 19,800 16,100 14,900 10,700 10,500 9900 7200 7700 7300 5300 *7200 6900 5100
Lower (std UC) – f. stabilizer & r. dozer down *21,500 *21,500 *21,500 *23,700 *23,700 18,400 *17,500 *17,500 12,000 *12,800 *12,800 8800 *7200 *7200 *7200
Lower (std UC) – f. dozer & r. stabilizer up *21,500 *21,500 19,800 16,700 14,300 10,700 10,900 9500 7200 8000 7000 5300 *7200 6600 5100
Lower (std UC) – f. dozer & r. stabilizer down *21,500 *21,500 *21,500 *23,700 *23,700 19,100 *17,500 *17,500 12,400 *12,800 *12,800 9000 *7200 *7200 *7200
Lower (std UC) – 2 sets stabilizersup *21,500 *21,500 20,100 16,600 14,800 10,800 10,900 9800 7300 8000 7300 5400 *7200 6900 5100
Lower (std UC) – 2 sets stabilizersdown *21,500 *21,500 *21,500 *23,700 *23,700 *23,700 *17,500 *17,500 15,100 *12,800 *12,800 10,900 *7200 *7200 *7200
–10 ft
MH – stabilizers up – solid tires 16,500 16,500 11,400 10,900 10,900 7700
MH – stabilizers down – solid tires *19,700 *19,700 *19,700 *14,400 *14,400 *14,400
Lower (std UC) – f. stabilizer & r. dozer up 16,200 15,000 10,800 10,600 10,000 7300
Lower (std UC) – f. stabilizer & r. dozer down *19,700 *19,700 18,600 *14,400 *14,400 12,100
Lower (std UC) – f. dozer & r. stabilizer up 16,900 14,500 10,800 11,000 9600 7300
Lower (std UC) – f. dozer & r. stabilizer down *19,700 *19,700 19,300 *14,400 *14,400 12,400
Lower (std UC) – 2 sets stabilizersup 16,700 15,000 11,000 10,900 9900 7400
Lower (std UC) – 2 sets stabilizersdown *19,700 *19,700 *19,700 *14,400 *14,400 *14,400
*Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or
quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.