1358 / 1618
8/10
Abrasives
8
SG-ELASTIC
Design:
Aluminium oxide (A24), soft, with fibre-reinforced resin bond
for long life and grinding performance. Standard bore 22.23 mm.
Application:
For aluminium work. Non-tool clogging even with soft,
lubricating substances.
Note:
Contains no fillers that leave unwanted residue on the tool. So
the surface is immediately ready for welding.
Order No.
Aluminium
Steel
Carbide
INOX
Cast
Plastic FRP
wood
Stone
Paint
8056
C
Order
No.
∅ x thickness
mm
8056
PU
Design
Max. rpm
min
-1
0115
115 x 7.2
3.62
10
Offset
13300
0125
125 x 7.2
5.00
10
Offset
12200
0178
178 x 7.2
6.05
10
Offset
8600
(W825)
Rough grinding disc for aluminium
Design:
Resin bonded corundum scattering (A) on rip resistant,
strong vulcanised fibre substrate. Tough, flexible grinding with high
removal rate,
lasts up to 30% longer
and has a temperature up to
30% lower.
Note:
Not suitable for peripheral grinding. Avoid using on sharp
edges.
Order No.
Aluminium
Steel
Carbide
INOX
Cast
Plastic FRP
wood
Stone
Paint
8017
C
8018
C
Order
No.
∅
mm
8017
8018
PU
Max. rpm
min
-1
0115
115
3.46
3.46
25
13300
0125
125
3.71
3.71
25
12200
(W840)
(W840)
Grinding wheel CC-GRIND
®
8017
SG-ELASTIC CC-GRIND STEEL
For the surface processing of steel.
Note:
Only for use with backing pads
(Order No. 8017 1000).
8018
SG-ELASTIC CC-GRIND INOX
For the surface processing of stainless steel.
With cooling properties due to grinding-
activated additive coating.
Note:
Only for use with backing pads
(Order No. 8018 1000).
8018
8017
Backing pads for CC-GRIND
®
8017
8018
Order
No.
∅
mm
8017
8018
1000
115/125
26.01
26.01
(W840)
(W840)
Design:
With a patented quick-clamping device for quick and tool-free
replacement of the grinding wheel, optimised cooling vent geometry
for high air flow and M14 thread.
Application:
For mounting CC-GRIND
®
grinding wheels on all
standard angle grinders at max. 80 m/s peripheral speed.
For mounting CC-GRIND
®
STEEL backing pads.
For mounting CC-GRIND
®
INOX backing pads.
8017
8018
Rough grinding discs
1358