374 / 1618
2/120
Cutting Tools
2
Order
No.
Bosch No.
2735
2736
Cutting length
mm
Material Wood
mm
Plastic
mm
Tooth pitch
mm
Type of tooth
Use
0008
T 101 BIF
–
13.10
59 Bimetal 1.5–15 –
1.7 Lead angle ground,
teeth ground
Specially designed for laminate, plastic-coated boards
and multiplex boards.
0071
T 101 A –
11.30
74
HSS – 2–20
2
Lead angle ground,
teeth ground
For fine, straight cuts, ideal for Perspex
and polycarbonate.
0107
T 341 HM –
32.00
106 Carbide – 5–80
4.3 Carbide-tipped;
side set
For quick, straight cuts, ideal for glass fibre reinforced
plastic, cement fibre boards, plasterboard.
0110
T 141 HM 10.40 12.00
74 Carbide – 5–50
4.3 Carbide-tipped;
side set
Specially designed for GRP, plasterboard,
cement fibre boards.
(W248)
(W247)
Jigsaw blades for special applications
2735
Saw blade quality:
Carbide-tipped:
The HSC blade is equipped with carbide
teeth and is thus suitable for abrasive materials such as
glass-fibre-reinforced plastics, asbestos cement, hard
woods and aerated concrete.
2736
Saw blade quality:
HSS:
Fully hardened high-speed steel for use in harder
materials such as metal, aluminium and non-ferrous
metals.
Bimetal:
Highly flexible, almost non-breakable
combination of HSC and HSS, long service life.
Can be used for hard woods, abrasive wooden materials,
hard plastic, non-ferrous metals and metals.
Carbide-tipped:
The HSC blade is equipped with carbide
teeth and is thus suitable for abrasive materials such as
glass-fibre-reinforced plastics, asbestos cement,
hard woods and aerated concrete.
Tooth design:
Teeth milled, side clearance side set.
Blade with relatively coarse cut and fast work progress in
hard and soft wood, aluminium, plastics and non-ferrous
metals.
Jigsaw blades for plastics
Order
No.
Bosch No.
2736
Cutting length
mm
Material
Plastic
mm
Tooth pitch
mm
Type of tooth
Use
0150
T 102 D
8.60
100
HCS
5–30
4.0
Lead angle ground,
teeth ground
For the problem-free, clean sawing of polypropylene
(PP) and similar soft thermoplastic materials.
0155
T 102 H
8.60
100
HCS
3–30
2.3
Lead angle ground,
teeth ground
For the problem-free, clean sawing of PVC
and similar soft thermoplastic materials.
0160
T 302 H
12.65
132
HCS
3–65
2.3
Lead angle ground,
teeth ground
For PVC (polyvinyl chloride), is often used
for windows and structural elements.
0165
T 102 BF
11.30
92
BiM 2–20
1.8
ground, side set
For the clean, splinter-free sawing of PMMA
(polymethyl methacrylate), is used e.g. for
balcony panelling and shower doors.
0170
T 108 BHM
22.60
92
Carbide
0–20
2.2
Carbide-tipped,
ground
Use: For easy, clean sawing of CFK and
similar plastics such as carbon fibre.
0175
T 301 CHM
31.70
117
Carbide
0–65
3.3
Carbide-tipped,
ground
For easy cutting of Corian
®
and similar solid
surface materials such as Varicor
®
.
(W247)
Saw blade quality:
HSS:
Fully hardened high-speed steel for use in harder materials such
as metal, aluminium and non-ferrous metals.
Bimetal:
Highly flexible, almost non-breakable combination of HSC
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Carbide-tipped:
The HSC blade is equipped with carbide teeth and
is thus suitable for abrasive materials such as glass-fibre-reinforced
plastics, asbestos cement, hard woods and aerated concrete.
Tooth design:
Teeth milled, side clearance side set. Blade with
relatively coarse cut and fast work progress in hard and soft wood,
aluminium, plastics and non-ferrous metals.
Tooth pitch:
Small tooth pitch for fine cuts
with slower work progress, in hard and/or
thin material such as metals and non-ferrous
metals.
Large tooth pitch for coarser cuts coupled with fast work progress in
soft and/or thick material such as wood and plastic.
Application:
Saw blades for clean cutting results in typically commercial plastics
and shapes.
Design: 5 pieces on card, T 108 BHM and T 301 CHM,
3 pieces on card.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi,
Mafell, Makita, Metabo, Protool.
Tooth pitch:
Small tooth pitch for fine cuts
with slower work progress, in hard and/or
thin material such as metals and non-ferrous
metals.
Large tooth pitch for coarser cuts coupled with
fast work progress in soft and/or thick material
such as wood and plastic.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress,
in hard and/or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in
soft and/or thick material such as wood and plastic.
Application:
Saw blades are subject to high mechanical and thermal loads. For this
reason, the use of specific coolants, e.g. cutting oil (for steel, metals)
or water (for aluminium, INOX, thin sheets), is recommended in order
to extend the wear-resistance of the saw blade.
Design: 5 pieces on card, T 341 HM, 3 pieces on card.
T 141 carbide, 1 blade on card .
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi,
Mafell, Makita, Metabo, Protool.
Jigsaw blades
374